To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-D201S and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.8% (1 kHz, 8 ohms) |
| Dimensions | 435 x 146 x 375 mm |
| Weight | 10.2 kg |
| HDMI Outputs | 1 |
| Inputs | 1 optical digital, 1 coaxial digital |
| Power Output (6 ohms) | 100 W per channel (6 ohms, 1 kHz, 1% THD) |
| Input Sensitivity | 200 mV |
| Speaker Impedance | 6 - 16 ohms |
Explanation of the CAUTION symbol regarding electrical shock and not opening the device.
Warning against exposing the appliance to rain or moisture to prevent fire or electric shock.
Caution regarding the STANDBY/ON button not fully disconnecting power.
FCC compliance information for the United States.
Regulatory compliance information for Canada.
Identification and description of the front panel controls and indicators.
Explanation of the indicators and information shown in the display window.
Identification and description of the rear panel connection terminals.
General precautions and advice before proceeding with the installation.
Important safety and handling precautions for the receiver.
Recommendations for suitable installation locations for the receiver.
Instructions on how to safely handle the receiver unit.
List of accessories included with the receiver to verify.
Instructions on how to power on the receiver.
How to select the desired audio/video source to play.
Instructions on how to put the receiver into standby mode.
Guide to easily register speaker size, distance, and output level.
Defines speaker size based on the number of connected speakers.
Details speaker distance and output levels based on room size.
Overview of adjustable basic settings with page references.
Procedure to register speaker settings for optimal surround effect.
Registering the sizes of all connected speakers.
Registering the number of surround back speakers connected.
Setting speaker distances for optimal sound effect from Surround/DSP modes.
Setting for Surround modes for digital multi-channel software.
Selecting playback channel for Dual Mono digital software.
Adjusting subwoofer output and bass enhancement.
Setting crossover frequency for small speakers to reallocate bass.
Adjusting LFE level to eliminate distortion in bass sound.
Using Midnight mode for powerful sound, useful at night.
Registering components connected to DIGITAL IN terminals.
Selecting the type of video input jacks for connected components.
Overview of adjustable sound items with page references.
Adjusting output levels for each speaker for balanced sound.
Adjusting equalization patterns in five frequency bands for front speakers.
Reinforcing bass levels and adjusting sound parameters.
Attenuating input signal level to prevent distortion.
Adjusting sound parameters for Surround/DSP modes.
Adjusting virtual room size for DSP modes to enhance realism.
Adjusting liveness effect for DSP modes to control room acoustics.
Adjusting panorama for Pro Logic IIx Music and Pro Logic II Music.
Adjusting center channel sound movement for Pro Logic IIx Music.
Adjusting sound localization position for Pro Logic IIx Music.
Adjusting center channel localization for Neo:6 Music.
Adjusting the dialogue clarity for center channel.
Aligning vertical localization of center channel for Surround/DSP modes.
Instructions for manually tuning to FM/AM stations.
How to store and tune to preset radio stations.
Procedure to select and listen to a stored preset station.
Changing FM reception mode (AUTO MUTING/MONO) for better reception.
Explanation of how surround modes create a theater-like sound experience.
Overview of available Dolby Digital and Dolby Pro Logic II surround modes.
Description of DAP modes like Hall, Live Club, Dance Club, Pavilion, Theater.
DSP mode for reproducing monaural sound video software.
DSP mode for larger stereo sound field using all speakers.
Function to create surround effect from behind without surround back speakers.
Procedure to select and activate desired Surround/DSP modes.
Diagrams for connecting AV COMPU LINK components.
Diagrams for connecting video components via S-video, composite, or component.
Simple playback of DVD without manual source selection.
Automatic TV input mode selection when receiver source changes.
Synchronization of power on/off for receiver, TV, DVD player, and VCR.
Simple playback of video cassette without manual source selection.
Setting manufacturer codes to operate other brands' TVs.
Troubleshooting common power-related issues.
Troubleshooting common sound-related issues.
Troubleshooting issues with the remote control operation.
Troubleshooting common tuner reception problems.
Technical specifications for the amplifier section.
Technical specifications for audio inputs and outputs.
Technical specifications for video inputs and outputs.
Technical specifications for the FM tuner.
Technical specifications for the AM tuner.
General specifications including power, dimensions, and mass.
Details of JVC's warranty service for defective products.
Customer responsibilities for obtaining warranty service.
Exclusions from the limited warranty coverage.
Information and instructions for registering the JVC product.
General installation guidelines and safety instructions.
Guidelines for proper ventilation and wall/ceiling mounting.
Instructions for grounding antennas and protection against lightning.
Safety precautions regarding proximity to power lines.
Safety precautions for product usage, cleaning, and heat.
Instructions on when to refer servicing to qualified personnel.
Conditions that require professional service for the product.
Guidelines for using specified replacement parts.
Importance of safety checks after service or repairs.
