Need help?Do you have a question about the JVC RX-D702B and is the answer not in the manual?
General| HDMI Outputs | 1 |
|---|---|
| Network Connectivity | No |
| Audio Formats | Dolby Digital, DTS |
| Tuning range | FM, AM |
| Input sensitivity | 200mV (line) |
| Signal to noise ratio | 98dB (line) |
| Speaker load impedance | 6 ohms |
| Digital inputs | 2 optical, 1 coaxial |
| Video Connections | Composite, Component |
Essential safety warnings and precautions for operating the receiver.
Highlights the advanced technologies and capabilities of the receiver.
Guidelines for safe operation, power, and ventilation.
Details the function and location of each button on the remote.
Identifies all controls, indicators, and input/output jacks on the front panel.
Explains the various indicators shown on the receiver's display.
Details all input and output terminals on the rear panel.
Covers initial installation, handling precautions, and location advice.
Lists all included accessories to verify upon purchase.
Instructions for connecting AM loop and FM antennas for optimal reception.
Guide to connecting all speaker types to the receiver's terminals.
How to connect a powered subwoofer for enhanced bass.
Explains the receiver's ability to convert and output various video signals.
Important considerations before connecting video components.
Details how to connect the TV to view output signals from connected components.
Instructions for connecting DVD recorders and players via various interfaces.
Guide for connecting VCRs using HDMI, component, S-video, or composite cables.
Instructions for connecting a DBS tuner via HDMI, component, S-video, or composite cables.
Instructions for connecting components using the front AUX input jacks.
How to use the receiver's digital coaxial and optical input/output terminals.
Final step to connect the receiver to the AC power outlet.
Guide for setting up wireless USB audio streaming from a PC.
Steps for connecting a PC directly via USB cable.
Procedures for installing necessary drivers for USB connectivity.
Steps to ensure the PC is ready for audio playback via USB.
How to turn the receiver on, off, and into standby mode.
Guide to choosing input sources for playback.
Configuring input settings for connected components.
Adjusting volume levels and using the headphone jack.
Choosing the appropriate decode mode for digital audio signals.
Temporarily muting sound and adjusting display brightness.
Setting the receiver to turn off automatically after a specified time.
Using the CC Converter to reduce digital distortion for natural sound.
Automatically calibrates speaker distance and levels using sound.
Details all configurable basic settings for the receiver.
How to navigate and use the on-screen display menus for settings.
Setting speaker sizes, subwoofer presence, and other configuration options.
Configuring surround back speakers and their number.
Measuring and setting speaker distances for accurate sound staging.
Selecting and activating advanced surround sound reproduction modes.
Choosing channels for Dual Mono sources and adjusting bass sound.
Adjusting speaker crossover, LFE level, and midnight listening mode.
Configuring digital input assignments and audio delay synchronization.
Memorizing settings per source and selecting HDMI/Component sources.
Setting video output signals and controlling on-screen menu display.
Lists adjustable sound parameters for fine-tuning audio output.
Overview of the structure for adjusting various audio parameters.
Step-by-step guide on how to operate and navigate setup menus.
Instructions for adjusting various sound and system parameters.
Fine-tuning the volume level for each individual speaker.
Adjusting frequency response, bass levels, and input signal attenuation.
Customizing DSP effect intensity and virtual room acoustics.
Adjusting sound liveness, panorama effects, and center channel width.
Fine-tuning sound stage, center channel localization, tone, and vertical alignment.
How to manually search and tune into FM and AM radio stations.
Procedures for saving and recalling favorite radio stations.
Choosing between AUTO MUTING and MONO for FM reception.
Understanding how DSP modes create immersive soundscapes.
Overview of Dolby Digital, Pro Logic II, and other surround sound technologies.
Explanation of Dolby Pro Logic IIx, DTS, DTS-ES, DTS 96/24, and DTS Neo:6.
Information on Linear PCM and Multi channel PCM signals.
Details on HALL, CLUB, DANCE, PAVILION, and THEATER modes.
Explains MONO FILM, ALL CH STEREO, and 3D HEADPHONE modes.
Table showing available modes based on signal type and settings.
Information on DSP modes and the Virtual Surround Back feature.
Steps to activate and adjust selected surround or DSP modes.
How to cycle through and choose desired surround or DSP sound modes.
Introduction to the AV COMPU LINK system and its connection types.
Three cases for connecting video components via S-video, composite, or component cables.
Step-by-step guide for connecting components for AV COMPU LINK.
How one-touch play and automatic TV input selection work.
Instructions for operating a JVC VCR using the receiver's remote.
Instructions for operating a JVC TV using the receiver's remote.
Basic operations for DVD recorders and players.
How to set the remote control code for DVD recorders.
Guide to changing remote signals to operate TVs from other brands.
Guide to changing remote signals to operate VCRs from other brands.
Guide to operating CATV converters and DBS tuners from other brands.
Guide to operating DVD players from other brands.
Solutions for problems related to power and the receiver entering standby.
Troubleshooting steps for issues with sound output and video display.
Solutions for problems with FM/AM reception and remote control operation.
Detailed technical specs for video inputs/outputs and amplifier performance.
Specifications for audio inputs, FM/AM tuners, power, and dimensions.
To Next Page
