To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-5020VBK and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| FM Tuner | Yes |
| Total harmonic distortion | 0.08% |
| Audio Formats Supported | Dolby Digital, DTS |
| Tuning range | 87.5 - 108.0 MHz |
| Frequency response | 20Hz to 20kHz |
| Speaker load impedance | 6 ohms |
| Video Connections | composite, HDMI |
| Input Sensitivity/Impedance | 200 mV / 47 kOhms |
| Tuner Section | FM, AM |
| Input sensitivity | 200mV (line) |
Covers primary warnings, Canadian and main unit compliance details.
Specific caution regarding the function and operation of the Standby/On button.
Instructions for proper unit placement to ensure adequate ventilation and prevent damage.
Identifies and explains the functions of components on the receiver's front panel.
Details the buttons and their corresponding operations on the remote control.
Covers general precautions, location advice, unit handling, and accessory checks.
Step-by-step instructions for inserting batteries into the remote control.
Guide for connecting the FM and AM loop antennas for radio reception.
Instructions for connecting front, center, rear, and subwoofer speakers.
Details on analog connections for various audio and video sources.
Instructions for connecting the power cord and setting up digital audio inputs.
How to turn the unit on/off and select input sources for playback.
Customizing source labels displayed for connected components.
Adjusting volume levels and instructions for listening with headphones.
Functions for temporary silence, timed shutdown, and automatic setting recall.
Explains the meaning of various signal and speaker indicators on the display.
Registering components connected to DIGITAL IN terminals for correct source naming.
Switching input modes for sources when both analog and digital connections exist.
Automatic detection of digital signals and configuration for subwoofer connection.
Configuring speaker sizes (Large/Small/None) and listening distances for optimal sound.
Adjusting crossover frequency, LFE attenuation, and dynamic range compression.
Attenuating input signal levels and adjusting front speaker output balance.
Adjusting bass/treble tone controls and subwoofer output levels.
Methods for tuning FM/AM stations using manual tuning and preset memory.
Adjusting FM reception for clearer stereo or mono signals.
Overview of Dolby, DTS, DAP, and All Channel Stereo surround sound modes.
Specific usage and features of DAP and All Channel Stereo modes.
How speaker configurations affect surround mode performance and selection.
Setup and usage guidelines for Dolby Pro Logic II, Dolby Digital, and DTS Surround.
Fine-tuning speaker output levels, test tones, and panorama control for surround sound.
Fine-tuning effects for DAP modes and adjustments for All Channel Stereo.
Explains COMPU LINK features like auto power, source selection, and system connections.
Step-by-step instructions for performing synchronized recording between devices.
Covers sound adjustments, tuner operations, and CD player controls via remote.
Instructions for operating CD changers, cassette decks, and CD recorders.
Covers VCR, TV, and DVD player controls using the remote.
Setting up remote codes to operate other brands' TVs and CATV converters.
Setting up remote codes to operate other brands' VCRs and DVD players.
Details on power output, audio input/output sensitivity, impedance, and frequency response.
Lists FM/AM tuner performance metrics and general unit dimensions and power requirements.
