Need help?Do you have a question about the JVC RX-5062S and is the answer not in the manual?
General| Power output | 50W per channel (8 ohms, 20Hz-20kHz, 0.09% THD) |
|---|---|
| Total harmonic distortion | 0.09% (20Hz-20kHz, 50W) |
| Input sensitivity | 150mV (line), 2.5mV (MM phono) |
| Tuning range | FM: 87.5-108 MHz, AM: 522-1611 kHz |
| Signal to noise ratio | 85dB (line), 72dB (phono MM) |
| Speaker load impedance | 8Ω to 16Ω |
| Video Connections | Composite video |
| Speaker Impedance | 8Ω to 16Ω |
| Signal-to-Noise Ratio | 85dB (line), 72dB (phono MM) |
Identifies the manual as instructions for operating the audio/video control receiver.
To Next Page
