Need help?Do you have a question about the JVC RX-5042S and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Inputs | Phono |
| Tuning range | FM: 87.5 - 108 MHz |
| Input sensitivity | 200 mV (Line) |
| Signal to noise ratio | 95dB (line) |
| Video Connections | composite |
General safety warnings regarding electrical shock, fire, ventilation, and moisture.
Guidelines for ensuring adequate airflow around the receiver to prevent overheating.
Pre-installation checks, location considerations, and handling precautions for the receiver.
Guide on connecting front, center, and surround speakers to the receiver's terminals.
Instructions for connecting a subwoofer and recommended placement for optimal surround sound.
Details connecting DVD players using analog, component, and digital video/audio interfaces.
Explains how to connect digital audio sources for improved sound quality.
How to choose audio/video sources and set digital input modes for components.
Automatically configures speaker size, distance, and levels for optimal surround effect.
Manually registers speaker sizes, distances, and subwoofer presence for precise surround sound.
Configures Auto Surround and other surround sound operation settings for enhanced audio.
Step-by-step guide for adjusting various sound parameters using the receiver's controls.
Fine-tunes audio frequencies (63Hz-16kHz) to customize the sound profile.
Balances the output levels of individual speakers for a consistent surround sound experience.
Adjusts parameters like effect level, center tone, and panorama for surround and DSP modes.
Automatically selects surround modes based on incoming signal type, simplifying operation.
Enables automatic source switching and receiver power on/off synchronization with connected components.
Diagrams and instructions for connecting video components using AV COMPU LINK system.
Outlines the connection steps and explains key AV COMPU LINK functions like one-touch play and auto input selection.
How to operate JVC audio components (Tuner, CD player, etc.) using the receiver's remote control.
How to operate JVC video components (VCR, TV) using the receiver's remote control.
Instructions for programming the remote to control TVs and CATV converters from other brands.
Addresses common issues like no sound, display problems, and remote control errors with solutions.
To Next Page
