Need help?Do you have a question about the JVC RX-5060B - AV Receiver and is the answer not in the manual?
General| Input Impedance | 47kΩ |
|---|---|
| Output Power / Channel | 100W |
| Frequency Response | 10Hz - 100kHz |
| Input Sensitivity | 200 mV (Line) |
| Output Impedance | 8Ω |
| Speaker Impedance | 8 - 16 Ohms |
FCC compliance statement for digital devices regarding radio frequency energy and interference.
Statement on digital apparatus radio noise emissions complying with Canadian standards.
General safety warnings, precautions against electric shock, fire, and moisture exposure.
Identification and numbering of controls and indicators on the receiver's front panel.
Identification and explanation of indicators shown on the receiver's display.
General precautions and location considerations for installing the receiver safely.
List of supplied accessories, how to check them, and instructions for inserting remote control batteries.
Steps for connecting audio components using RCA pin plug cables.
Details on connecting digital coaxial and optical output terminals from components.
Step-by-step guide for basic daily use of the receiver, including power and source selection.
How to select and play audio or video sources and turn the receiver on.
Guide to interpreting the illumination of speaker and signal indicators on the display.
How to listen to audio from one source while watching video from another.
Instructions for adjusting the receiver's volume using the front panel or remote control.
How to reduce input signal level to prevent distortion when analog source input is too high.
How to change the source name displayed for connected components like CD recorders.
Instructions for adjusting the brightness of the receiver's display.
How to manually tune FM and AM radio stations by scanning frequencies.
Instructions for storing and recalling favorite radio stations using preset channels.
Automated procedure for registering speaker size and distance for optimal surround effect.
Details on speaker size, channel numbers, room size, distance, and output levels for setup.
Detailed guide for setting speaker size, distance, subwoofer output, and bass sound characteristics.
How to select playback channels for Dual Mono audio sources.
How to set speaker distances from the listening point for precise sound delay.
How to adjust subwoofer output and bass sound characteristics.
Instructions for activating Virtual Surround Back for 6.1 channel playback with Dolby Digital EX/DTS-ES.
List of sound adjustment parameters available for the current sound mode.
General steps for accessing and performing sound adjustments using the receiver's controls.
Explanation of how surround sounds create a theater-like acoustic experience.
Detailed descriptions of Dolby Digital, Dolby Pro Logic II, and their variations.
How to activate 3D Headphone Mode for surround sound listening via headphones.
Explanation of the Auto Surround Function that automatically selects modes based on input signals.
Explanation of direct and indirect sounds and their importance in creating acoustic surround effects.
Descriptions of various DSP modes like Hall, Club, Theater, and Stereo.
How the receiver automatically selects components when play is pressed.
How to use synchronized recording between a CD player and cassette deck.
How to control amplifier functions like volume, muting, and speaker settings.
Instructions for operating tuner, CD player, CD recorder, and cassette deck controls.
How to operate connected VCR, DVD player, and TV using the receiver's remote.
Steps to set the remote control code for operating another manufacturer's TV.
Steps to set the remote control code for operating another manufacturer's CATV converter.
To Next Page
