To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-5000VBK and is the answer not in the manual?
Identifies and explains the controls and indicators on the receiver's front panel.
Lists and explains the buttons and functions of the receiver's remote control.
General advice, location considerations, and handling precautions for installing the receiver.
Instructions for connecting FM and AM antennas, including assembly and external connections.
How to connect a powered subwoofer to the receiver's subwoofer output jack.
Guide for connecting audio sources like CD players, cassette decks, and MD recorders via RCA cables.
Instructions for plugging the receiver into an AC outlet, with safety precautions.
Steps for inserting batteries into the remote control and precautions to avoid leaks.
How to turn the receiver on, off, and put it into standby mode using front panel or remote.
How to select different audio and video sources using front panel or remote control buttons.
How to adjust volume, use headphones, and mute/restore audio output.
How to select which pair of front speakers to use, or disable them.
How to record audio from a selected source to a connected cassette deck or MD recorder.
Adjust input signal level, speaker balance, bass boost, and treble/bass tone.
Customize source names and configure speaker settings for DSP modes.
How to register the delay time for rear speakers to match sound arrival times.
How to store custom sound settings for quick recall using the One Touch Operation function.
How to set the receiver to automatically turn off after a specified time.
Instructions for manually tuning FM and AM radio stations using front panel controls.
How to store and recall favorite radio stations using preset channel numbers.
Explains 3D-PHONIC modes (ACTION, THEATER) for enhanced surround sound with front speakers.
Describes DAP modes (DANCE CLUB, LIVE CLUB, HALL, PAVILION) for creating specific acoustic environments.
Details Dolby Surround (Pro Logic, 3 Stereo) and JVC Theater Surround modes for immersive audio.
How to adjust the effect level for 3D ACTION and 3D THEATER modes.
How to adjust rear speaker output level and effect level for DAP modes.
How to activate and adjust settings for the DVD MULTI playback mode for analog discrete output.
Automatic power, synchronized recording, and source selection via COMPU LINK connection.
Operations for sound control, including Surround, levels, delay, effect, and test tone.
Operations for controlling Cassette Deck, CD Player, and Tuner using the receiver's remote.
Specific remote control operations for CD changers, VCRs, DVD players, MD recorders, and TVs.
Lists factory service center locations for JVC products.
Warning against self-servicing and advice to refer to qualified personnel.
General
