JVC RX-5030VBK User Manual

AUDIO/VIDEO CONTROL RECEIVER
RX-6030VBK/RX-6032VSL
RX-5030VBK/RX-5032VSL
J
dv_
@U
o
o
oQ
o
o m
°O °
o o
AI/fbf'tllll211 I IAIW"
_W _flvlrlkw J_llWJflk
_P'tBBnl l I IW
_flflr v hllVB_k
DIGITAL
SURROUND
DIGITAL
•_llle] _slCll_ Ill
INSTRUCTIONS
For Customer Use:
Enter below the Model No. end Serial
No. which ere located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0984-O01 B
[J]

JVC RX-5030VBK Specifications

General

Channels	2
Tuning range	FM: 87.5 - 108.0 MHz; AM: 530 - 1710 kHz
Frequency Response	20 Hz - 20 kHz
Total Harmonic Distortion	0.08%
Input Impedance	47 kΩ
Input Sensitivity	2.5mV (MM)
Video Connections	Composite video
Power Output	100 watts per channel into 8Ω (stereo)
Signal to noise ratio	85dB (MM), 100dB (line)

Summary

Safety Warnings and Precautions

General Safety Warnings

Important precautions regarding electrical shock, fire, and moisture exposure.

JVC Receiver Parts Identification

Front Panel Controls and Display

Identification of front panel controls, indicators, and display elements.

Remote Control Layout

Diagram and explanation of the remote control buttons and their functions.

Getting Started: Initial Setup and Connections

Before Installation and Setup

Important steps before operation: precautions, location, accessories, and antenna setup.

Getting Started: Speaker and Subwoofer Setup

Connecting Speakers and Subwoofer

Procedure for connecting front, center, surround speakers, and a subwoofer.

Getting Started: Audio/Video Component Connections

Analog Component Connections

Instructions for connecting audio/video components using analog (RCA, S-Video) inputs.

Getting Started: Digital Connections and Power

Digital Connections

Guide to connecting components using digital coaxial or optical cables.

Power and Remote Control Setup

Basic Operations: Power, Source, and Volume Control

Turning Power On/Off

Selecting the Source to Play

Basic Operations: Source Name and Picture/Sound Settings

Basic Operations: Volume, Headphones, and Muting

Adjusting the Volume

Basic Operations: Sleep Timer and Auto Memory

Basic Settings: Initial Configuration

Basic Settings Using MULTI JOG Dial

Introduction to the basic setting procedure using the MULTI JOG dial.

Setting Speaker Information

Guide to configuring speaker settings for optimal surround sound performance.

Basic Settings: Speaker and Input Configuration

Speaker Distance Settings

Setting speaker distances from the listening position for accurate sound staging.

Crossover Frequency and LFE Attenuation

Basic Settings: Digital and Video Input Selection

Selecting Digital Input Terminals

Selecting Video Input Terminals

Sound Adjustments: Input Signal and Bass Boost

Attenuating Input Signal and Turning Off Subwoofer

Reinforcing the Bass

Sound Adjustments: Using MULTI JOG Dial

Sound Adjustments Using MULTI JOG Dial

Guide to adjusting tone, subwoofer, speaker levels, and effect levels.

Sound Adjustments: Speaker Levels and Remote Control

Tone, Subwoofer, and Speaker Level Adjustments

Adjusting tone, subwoofer, and individual speaker output levels for desired sound.

Using Remote for Sound Adjustments

Sound Adjustments: Test Tone and Subwoofer Output

Adjusting Speaker Output Levels Using Test Tone

Procedure to use the test tone for balancing speaker output levels.

Adjusting Subwoofer Output Level

Detailed steps for adjusting the subwoofer's output volume level.

Tuner Operations: Manual and Preset Tuning

Tuning in to Stations Manually

Using Preset Tuning

Tuner Operations: Storing Stations and Reception Mode

Storing Preset Stations

Creating Realistic Sound Fields: Surround Modes

Surround Modes Overview

Dolby Pro Logic II and Dolby Digital

Creating Realistic Sound Fields: DSP Modes and Tables

DTS Digital Surround and DSP Modes

Creating Realistic Sound Fields: Using Surround Modes

Using Surround Modes

Instructions for selecting and activating surround sound modes based on input signal.

Creating Realistic Sound Fields: Using DSP Modes

Using DSP Modes

Instructions for selecting and activating Digital Acoustic Processor (DSP) modes.

Using DVD MULTI Playback Mode

Activating DVD MULTI Playback Mode

Procedure to activate DVD MULTI playback mode for analog discrete output.

Troubleshooting Common Issues