JVC RX-5030VBK - Specifications

Specifications
RX-5030VBK/R_5032VSL
Amplifier
Output Power: At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Surround channels:
100 W per channel, min. RMS, driven into 8 _, 40 Hz to
20 kHz with no more than 0.8% total harmonic
distortion.
100 W per channel, min. RMS, driven into 8 _ at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 _ at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 _ at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)• :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 _2):
Tone Control:
CD, TAPE/CDR, VCR, TV SOUND, DVD: 220 mY/47 k_2
Coaxial: DIGITAL 1 (DVD): 0.5 V (p-p)/75
Optical: DIGITAL 2 (CD): -21 dBm to -15 dBm (660 nm -+30nm)
Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency--32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR: 220 mV
CD, TAPE/CDR, VCR, TV SOUND, DVD: 87 dB/78 dB
CD, TAPE/CDR, VCR, TV SOUND, DVD: 20 Hz to 20 kHz (_+1dB)
Bass (109 Hz): -+10dB
Treble (10 kHz): -+10dB
Video
Video Input Sensitivity/Impedance:
Composite video: DVD, VCR:
Video Output Level/Impedance:
Composite video: VCR, MONITOR OUT:
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
1 V (p-p)/75 £_
1 V (p-p)/75 £_
FMtuner(IHF]
Tuning Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
Signal-to-Noise Ratio (IHF-A weighted):
Total Harmonic Distortion:
Stereo Separation at REC OUT:
Alternate Channel Selectivity:
Frequency Response:
87.5 MHz to 108.0 MHz
Monaural:
Monaural:
Stereo:
Monaural:
Stereo:
Monaural:
Stereo:
35 dB at 1 kHz
45 dB: (_+400kHz)
30 Hz to 15 kHz: (+9.5 dB, -3 dB)
12.8 dBf (1.2 pV/75 £_)
21.3 dBf (3.2 pV/75 £2)
41.3 dBf (31.5 #V/75 _2)
78 dB at 85 dBf
73 dB at 85 dBf
0.4% at 1 kHz
0.8% at 1 kHz
AM tuner
Tuning Range: 530 kHz to 1 710 kHz
Usable Sensitivity: Loop antenna: 400 #V/m
Signal-to-Noise Ratio: 50 dB (100 mV/m)
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Mass:
AC 120VF_/, 60 Hz
180 W/230 VA (at operation)
2 W (in standby mode)
435 mmx 146.5 mm x 409.5 mm
(17 3116in. x 5 _3/16in. x 16 % in.)
8.8 kg (19.5 Ibs)
4O