Thesequicksetuppageswillprovideyou,inthreeeasysteps,withthebasicinformationyou
needtobeginusingyournewtelevisionrightaway.
Ifyouhavequestions,orformoredetailedinformationonanyofthesesteps,pleaseconsult
othersectionsofthismanual.
Beforeyoucanoperateyourremotecontrol,youfirstneedtoinstallthebatteries(included).
Liftandpullthelatchonthebackofthe
remotecontroltoopen.inserttwobatteries
(included)carefullynotingthe"+"and"-"
markings,placingthe"-"endintheunitfirst.
Snapthecoverbackintoplace.
Whenyouchangethebatteries,tryto
completethetaskwithinthreeminutes.
Ifyoutakelongerthanthreeminutes,
theremotecontrolcodesforyourVOR,
DVD,and/orcabBebox/satellitereceiver
mayhavetobereset.Seepages18-21.
Key Feature Buttons
The four key feature buttons at the center of the remote
can be used for basic operation of the television. The
top and bottom buttons will scan forward and back
through the available channels. To move rapidly through
the channels using JVC's Nyperscan feature, press
and hold CH+ or CH-. The channels will zip by at a
rate of five channels per second. The right and left
buttons will turn the volume up or down. These buttons
are also marked with four arrows and are used with
JVC's onscreen menu system. To use the onscreen
menus, press the MENUbutton. Note: Hlustration of remote
control RM=CI259G
To Next Page
Loading...
