Basic Operation
Turn the television on and off by pressing the POWERbutton at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
Make sure the TV/CATV switch is set to TM Move the switch to CATV only if
you need to operate a cable box.
Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 18 to 21 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may have.
After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
A VCR is not necessaryfor---------_peration 0f the-television, if you fotlow !hese d!a
telev!s!on doe s not work propel!y, contact y0ur !0ca! 9ab! e opeEat0r_
,_Tb connect a avD Player, see D!agram #3, A DVD P!aYer is, Optional
If ou have a Sateflite television s stern, lease refer to the Satellite TV manual
y y p _uaL
Do you use a Cable TV Box?
I Do you have a VCR? ] Do you have a VCR? ]
Diagram #2 Diagram #1 Diagram #3 Diagram #1
To Next Page
Loading...
