JVC D Series - DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and stiWpause operation,
f) Find the DVD player brand from the list of codes shown below,
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD',
3) Press and hold down the DISPLAYbutton, then enter the first code number listed with the 10
key pad,
4) Release the DISPLAYbutton, and confirm the operation of the DVD player,
If your DVD player does not respond to the first code, try the others listed, If it does not
respond to any of the codes, try the search codes function on page 21,
After you program your remote, some DVD buttons may not work properly, If so, use the DVD
piayeCs remote,
037
031
Aiwa
Apex
Denon
Hitachi
JVC
Kenwood
Konka
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
Raite
043
040
020,
030,
000
035
039
025
041
044
020
023,
022
033
036
RCA 021,026
Sampo 034
Samsung 030
Sharp 028
Silvania 038
Sony 024,
047
Technics 020
Toshiba 023
Vialta 050
Wave 042
Yamaha 020
Zenith 027, 032
045,046,