JVC D Series - Search Codes

Cable/Satelite Search Codes Function
1) Slide the first 2-Way [,#lodeSelector switch to CATV_
2) Press and hold down the POWERbutton, then press the RETURN+button for more than three
seconds.
3) Release the RETURN+button, then release the POWERbutton.
4) Press the POWERbutton on the remote, and see if the cable or satellite box responds.
5) If there was a response, press RETURN+.The codes are now set. if there was no
response, repeat Step 4. if you repeat Step 4 a total of 52 times without a response, use
the remote control that came with your equipment.
6) Press RETURN+to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR" or
"D\tD".
2) Press and hold down the VCR or DVD POWERbutton, then press the RETURN+button for
more than three seconds.
3) Release the RETURN+button, then release the VCR or DVD POWERbutton.
4) Press the VCR or DVD POWERbutton, and see if the VCR or DVD responds.
5) If there was a response, press RETURN+.The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press RETURN+to exit.