Timer-Link mode: Deactivate
Timer-Link Recording
Note: Timer-Link works by using the timer function of
most Cable/Satellite Boxes. Please check
whether your current box has a "Timer" function.
Note: Timer-Link doesn't work, if Cable/Satellite Box
keeps a "Screen Saver" in "Power Off".
Timer-Link works only with " Input 1" connector.
Note: If the Timer-Link "On",
" " indicator blinks on the
JVC deck's display window.
1
Set Up Timer
of Cable/Satellite Box
5
Power Off
DR-MV80B
6
Hold "z (REC)"
Button for 3 seconds
1. When your Cable/Satellite Box is powered on by the timer function, DR-MV80B
is also powered on and starts to record (It takes about 1 seconds) automatically.
2. When your Cable/Satellite Box is powered off using the timer function, DR-MV80B
also stops recording (It takes about 3 seconds) and then powers off automatically.
7
Power On
DR-MV80B
This operation makes "Timer-
Link" been off after finishing
Timer-Link record. If you keep
"Timer-Link" on, you don't need
this step.
INSTRUCTIONS
pg. 30
Select "DVD or VCR"
3
or
4
Select Mode
2
Power Off
Cable/Satellite Box
- 5 -
To Next Page
Loading...
Need help?
General
