P
pittmanlauraJul 28, 2025
What to do if JVC DVD Player power does not come on?
- CCody BryanJul 28, 2025
If your JVC DVD player isn't powering on, the most likely cause is that the power plug isn't fully inserted. Make sure to plug it in securely.
To Next PageTo Next PageWhat to do if JVC DVD Player power does not come on?
If your JVC DVD player isn't powering on, the most likely cause is that the power plug isn't fully inserted. Make sure to plug it in securely.
Why JVC XV-M556TN DVD Player remote control does not work?
If the remote control for your JVC DVD player isn't working, several factors could be the reason. First, ensure you are close enough to the unit. Second, make sure you're pointing the remote's infrared light-emitting window directly at the remote sensor on the front panel. Third, try replacing the batteries with new ones. Finally, check the battery polarity; remove the batteries and re-insert them in the correct direction.
What to do if there is no picture on JVC XV-M556TN?
If no picture is displayed on the monitor when using your JVC DVD player, there are a few things to check: * Verify that the video cable is correctly connected. * Ensure that the input selection on your TV is correctly set. * Confirm that the disc you are trying to play is a playable disc.
What to do if JVC DVD Player operation is not possible?
If your JVC DVD Player is not working, it could be due to a microcomputer malfunction caused by lightning or static electricity. To resolve this, turn off the power, unplug the power cord, and then plug it back in. Alternatively, moisture condensation from a sudden change in temperature or humidity could be the cause. In this case, turn off the power and turn it back on a few hours later.
What to do if JVC XV-M556TN DVD Player picture does not fit the television screen?
If the picture from your JVC DVD player doesn't fit the television screen, it could be because the MONITOR TYPE is not correctly set, or the television is not correctly set.
Why JVC DVD Player has no audio?
If no audio is reproduced from your JVC DVD player, first check the connections to ensure they are correct. Secondly, verify that the input selection on your amplifier is correctly set.
Why no audio when playing DVD disc recorded with 96-kHz, linear PCM audio on JVC XV-M556TN?
If you're not getting any audio when playing a DVD disc recorded with 96-kHz, linear PCM audio on your JVC DVD player, and the audio signal is derived from the unit's DIGITAL OUT, try using the AUDIO OUT instead when playing back such discs.
General| Type | DVD player |
|---|---|
| Progressive Scan | Yes |
| Video Output System | NTSC |
| Remote Control | Yes |
| Power Supply | AC 120 V, 60 Hz |
| Playable Media | DVD, CD |
| Video Output | Composite, S-Video, Component |
| Audio Output | Stereo, Optical, Coaxial |
| Playback Features | Zoom |
| Region Code | 1 |
To reduce the risk of electrical shocks, fire, etc.: Do not remove screws, covers or cabinet. Do not expose this appliance to rain or moisture.
DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION: Do not open the top cover.
To avoid risk of electric shock and fire and to protect from damage, locate the apparatus with proper spacing.
Covers Strobe, Digest, Angle, Zoom, Parental lock, and Theater position functions.
Details high quality digital sound, Surround, and 3D Phonic functions.
Covers triple disc trays, subtitles, multi-disc playback, and on-screen display operation.
Lists the items provided with the DVD player unit.
Identification of buttons, indicators, and ports on the front panel of the unit.
Understanding the meaning of various messages and indicators shown on the player's display.
Details on the audio and video output jacks available on the rear of the unit.
Explains various on-screen messages and icons displayed during operation.
Describes how to access and configure various preference settings for the unit.
Details the interface and steps for setting parental control restrictions.
Explains how the screen saver prevents monitor burn-in from static images.
Explains the meaning of icons displayed on the screen during DVD playback.
Guide for entering numbers to select titles, tracks, or other options.
Identifies playable and non-playable disc formats supported by the player.
Understanding titles, chapters, and tracks on DVD, CD, and VCD discs.
Important steps to follow before connecting external components to the player.
Basic instructions for hooking up the DVD player to a television.
Instructions on how to operate the DVD player using its remote control.
Procedure for opening the battery compartment and inserting batteries.
Using the remote to control basic TV functions like input and volume.
Instructions for turning the player on and placing it in standby mode.
Steps for loading and unloading discs into the player's trays.
Procedures for initiating, pausing, and completely stopping disc playback.
Monitoring playback at high speeds and finding specific points on the disc.
Continuing playback from a saved position after interruption.
Accessing content at chosen points on a disc using menus or search.
Using on-screen menus for content selection and playback.
Directly accessing specific chapters on a DVD by entering the chapter number.
Locating playback based on the elapsed time within a title or track.
Introduction to frame-by-frame, strobe, slow-motion, and zoom playback features.
Viewing still images and sequences of still pictures for detailed analysis.
Playing discs at reduced speeds for detailed viewing of action or transitions.
Magnifying portions of the picture for closer inspection of details.
Setting a custom order for playing titles or tracks from discs.
Playing titles or tracks on inserted discs in a random sequence.
Repeating current tracks, titles, chapters, or all discs inserted.
Repeating a specific segment of content defined by points A and B.
Choosing from multiple camera angles recorded on a DVD disc.
Changing camera angles using an angle list display.
Setting the default subtitle language for playback from discs.
Selecting preferred audio tracks and guide vocals for karaoke and movies.
Modifying image tone and quality settings for optimal viewing.
Creating simulated surround sound effects from stereo audio.
Activating and configuring the 3D Phonic effect for enhanced audio.
Displaying current playback status, disc details, and time information.
Viewing active selections like camera angle, audio language, and subtitle.
Steps to turn on the karaoke feature for singing along.
Guidance on plugging microphones into the MIC 1/2 jacks.
Selecting and queuing songs for playback in a desired order.
Choosing preferred audio options like guide vocal or accompaniment on karaoke discs.
Adjusting multi-sound karaoke specific settings for optimal performance.
Removing or reducing vocals from recorded tracks using the voice cancel function.
Automatically replacing guide vocals when the user stops singing.
Applying echo and other enhancements like Chorus, Flanger, and Harmony to the voice.
Adjusting the intensity of the echo effect applied to the microphone input.
Explains Chorus, Flanger, and Harmony effects for vocal enhancement.
Adjusting the song's pitch to better suit the singer's vocal range.
Using front panel buttons to adjust the musical key of songs.
Using the remote control buttons to shift the musical key of songs.
Accessing and navigating the preference menus for customization.
Configuring default display and audio track languages for discs.
Adjusting monitor type, screen saver behavior, and on-screen guide display.
Configuring auto standby, resume playback, and AV COMPU LINK mode.
Initial configuration of content restrictions based on age ratings.
Modifying the lock level or password for parental controls.
Allowing playback of restricted content temporarily.
Introduction to JVC's integrated component control system.
Wiring and configuring components for unified system control.
How to use the connected AV COMPU LINK system for unified operation.
Proper methods for handling, cleaning, and storing discs to ensure playback.
Diagnosing and resolving frequent player problems like power, picture, and sound issues.
Detailed technical data including power, dimensions, video/audio outputs, and frequency response.
List of language codes used for subtitle and audio track selection.
List of country codes used for setting parental lock restrictions on DVD discs.