To adjust the picture tone
1 Select "USERI" or "USER2."
• Follow steps 1 and 2explained on page 15.
2 Select a parameter you want to adjust.
Q ENTER
i
GAMMA Adjust if the neutral color is bright or
dark (-3 to +3).
BRIGHTNESS Adjust if the entire picture is bright
or dark (-8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural ( 7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (-7 to +7).
TINT Adjust if the human skin color is
unnatural ( 7 to +7).
SHARPNESS Adjust if the picture is indistinct
(-8 to +8).
3 Adjust the parameter.
\
ENTER
4 Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again while holding SHIFT.
8ettl g !he610¢k :;: ::
Without setting the built-in clock, you cannot use Daily
Timers (see page 29) and Sleep Timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.
1 Activate the clock settiug nmde.
CLOCK/
TIMER
F4M
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Adjust the hour.
_ SET
3 Adjust the minute.
)[J_ SET
Now the built-in clock starts working.
To check the current clock time during play
DISPLAY
, Clock
information _-J
• While playing a DVD and MP3&VMA, you cannot check
the current clock time (see page 9).
16
To Next Page
Loading...
