EN 51
To Copy All Images
Before doing the following, perform steps 1 through 5 on page 49.
6
Rotate the MENU Jog Dial to select “ALL” and
push it.
•The Copy Confirmation Screen appears.
7
Rotate the MENU Jog Dial to select
“EXECUTE” and push it.
•The message “IMAGE COPYING IN
PROGRESS” is displayed, and copying starts.
When the message disappears, copying is
complete.
NOTES:
●
While copying, never disconnect the power
supply or remove the Compact Flash card, as this
may cause the stored images to be erased or the
camera's built-in memory to be corrupted. Also,
be sure to use the optional AC power adapter, as
the camera’s built-in memory or the Compact
Flash card may be corrupted if the batteries
become exhausted during the copy operation.
●
If 5 images stored in a Compact Flash card are
copied to the built-in memory, which contains 10
stored images, the index numbers of the copied
images will be from 11 to 15.
COPY
ALL
SELECTED
EX I T
COPY
EXECUTE
EX I T
COPY Screen
Copy Confirmation Screen
To Next Page
Loading...
