JVC GC-S1 - Bottom View; Hand Strap Attachment

58 EN
CONTROLS, CONNECTORS AND INDICATORS (cont.)
Hand Strap Attachment
1
Open the jack cover.
2
Thread the end of the hand strap through the
camera's eyelet, then thread the loop of the
hand strap through the end.
3
Close the cover.
1 EJECT Button ............................ Z pg. 46
Press to eject the optional Compact Flash
card.
2 Tripod Mounting Socket
When attaching a tripod, insert the
threaded section of the tripod in this hole
and turn to secure. Use only tripods not
equipped with a stud that prevents the
camera from rotating.
3 Hand Strap Eyelet
Thread the provided hand strap through
this eyelet.
4 Compact Flash Card Slot ........... Z pg. 46
Insert an optional Compact Flash card. For
details,
Z pg. 46.
5 Reset Switch
Allows you to reset the camera to its
factory presets. First, remove the power
supply (AC power adapter, batteries, etc.),
then insert a pin or similar object into this
hole.
Bottom View
Loop
12
5
34
1
2
3