JVC GR-45 User Manual

rSS’»i , S‘- b a 3 .!"V V pro-"P’'V-
Recording the date/time
Battery insertion
This battery powers the date/time function.
1 Slide the cover off the CLOCK BATTERY compartment on the bottom
of the VideoMovie by pressing lightly on the section labelled (A) in the
diagram.
2. Insert the provided lithium battery with the plus (+) side up.
3- Slide the cover on until it clicks.
Notes:
•Switch off the unit's power before inserting the battery.
•When the battery is inserted, the clock will begin functioning.
Battery replacement
The battery lasts for about one year. When the lithium battery warning
( ► E) appears in the viewfinder, this battery needs to be replaced. Obtain
a new CR 2025 lithium battery and follow the following procedure.
1. Remove the battery by pressing the knob in the direction of the arrow.
2. Insert the new CR 2025 with the plus (+) side up.
3. Slide the cover back until it clicks.
Note:
Switch off the unit's power before removing old battery.
Replace battery with Matsushita type CR 2025 only. Use
of another battery may present risk of fire and explosion.
Date/time setting
Before adjusting the date and time for the first time or
finder, indicating the clock needs to be set.
©Switch the unit's power on, 1.1.87 will blink in
the viewfinder. Press MONITOR button to enter
Rehearsal mode.
® Press the DATE/TIME SELECT button - the year
blinks.
©Press the DATE/TIME SET button to choose the
correct number.
©Press the DATE/TIME SELECT button to select
the next item to change, with the item selected
after replacing the batteries, 1.1.87 blinks in the view¬
changing in the following sequence:
Year -* ■ Month — Day — Hour — Minute - Finish i
Adjustment
(D Repeat steps © and © to set all items. After the
minute setting has been performed, press the
DATE/TIME SELECT button, and items will
cease blinking. For the auto date record mode, the
auto date record reserve indicator will appear.
Date/time recording
The date, time, or date and time can be displayed and recorded according to the selected mode. Press the DISPLAY
SELECT button to cycle through the modes in the following order:
Auto date record Qate display
reserve _
•When the auto-date-record function is selected,
appears in the viewfinder, until record¬
ing begins. As long as this function is chosen,
the date will be automatically displayed and re¬
corded for about 5 seconds following the first
operation of the recording start/stop button after
-* ■ Date/time display -* Time display
the power is turned on.
•Auto date record reserve indication will cease to
be displayed if the DATE/TIME REC ON/OFF
button is set to OFF unless power is provided again.
Date/time recording indications
Auto date record
31.12.87
Auto date record
reserved
Auto date record
executed
Date display Date/time display Time display

JVC GR-45 Specifications

General

Brand	JVC
Model	GR-45
Category	Camcorder
Language	English