EasyManua.ls Logo

JVC GR-AXM151 - Page 20

JVC GR-AXM151
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYSTEM MENU
This Menu Screen cannot be accessed while
recording.
Allows you to set the recording mode. "EP"
(Extended Play) is more economical, providing
three times the recording time.
If the recording mode is switched during
recording, the playback picture will be blurred at
the switching point.
Zooming is possible from 16X (the optical zoom
limit), to a maximum of 50X or 600X digital
magnification.
When set to "OFF" only optical zoom (maximum
16x magnification) can function.
MAX: To record a subject in a darkly lit
environment, when it is more convenient to shoot
the subject with a brighter image even if the picture
becomes slightly coarse.
NORMAL: To record a subject in a dimly lit
environment, when it is more convenient to shoot
with a less coarse picture although the subject
becomes slightly dark.
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
When set to "ON" black bars will be recorded at the
top and bottom of the screen to produce a cinema-
like "wide-screen" effect.
While the "WIDE" mode is engaged, "LARGE" in
the "TITLE SETUP (SIZE)" (_. pg. 19, "CAMERA
MENU") cannot be selected.
Allows you to set the tape length depending on the
tape used: T20=20 minutes, T30=30 minutes,
T35=35 minutes, T40=40 minutes.
Tape remaining time _ is correct only if the
correct tape length has been selected.
FULL: Makes all of the indications appear on the
LCD monitor/viewfinder during playback or
recording.
SIMPLE: Makes the following indications
disappear from the LCD monitor/viewfinder during
recording or playback: r'_, tape remaining time,
¢_._, tape length (_ _ pg. 9, 17).
Makes the date/time appear in the camcorder or on
a connected monitor (set DATE/TIME in SYSTEM
MENU first _ _. pg. 7).
The selected display will be recorded. If you do
not want to record the display, select OFF before
shooting.
In the AUTO DATE mode, the camcorder records
the date for about 5 seconds when recording is
initiated after the date is changed, a cassette is
loaded, or AUTO DATE is selected. The date is
replaced after 5 seconds with "AUTO DATE" but
this is not recorded.

Related product manuals