EN 33
MasterPage: Start_Right
ADVANCED FEATURES
EDITING
A Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors).
B Red to AUDIO R IN*
C White to AUDIO L IN*
* Not required for watching still images only.
1 Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. (墌 pg. 21)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual).
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(墌 pg. 14)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”.
(墌 pg. 23, 26)
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(墌 pg. 23, 26)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (墌 pg. 23, 26)
Dubbing To A VCR
2
1
3
TV
VCR
Audio/Video
cable
(provided)
To AV
connector
GR-D340PAL.book Page 33 Thursday, November 10, 2005 5:01 PM
To Next Page
Loading...
Need help?
General
