—15—
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
1 Drop the memory card
icon on the desktop
into the [Trash] icon.
● If the confirmation
message appears, click
[OK].
2 Confirm that
“” is not
currently displayed on
the LCD monitor of the
camcorder.
● If “ ” is currently displayed,
wait until it disappears before
proceeding.
3 Disconnect the USB cable.
4 Set the camcorder’s Power
Switch to “OFF”.
The camcorder turns off.
This manual only refers to software
installation and PC connection. For more
details of each software, refer to its user’s
guide/help/Readme.
䡲 Digital Photo Navigator
● The instruction manual is included on the
CD-ROM in PDF format. Right-click the
CD-ROM icon in [My Computer], then
click [Open]. Double-click the [Docs]
folder. Open the “Start.pdf” file and click
the button of the desired language. Note
that Adobe
®
Acrobat
®
Reader
TM
or
Adobe
®
Reader
®
must be installed to read
PDF files.
● Adobe
®
Reader
®
can be loaded from
Adobe’s web site: http://
www.adobe.com/
Disconnecting the USB cable
(Macintosh)
User’s Guide/Help/Readme
(Windows
®
)
To Next Page
Loading...
Need help?
General
