MasterPage: Video_Heading0_Right
EN
7
GETTING STARTED
GETTING STARTED
Control Lever
There are two kinds of operation using the control
lever: moving the lever towards up/down/left/right,
or pressing down the lever.
They are described and illustrated as shown
below.
1)
Move the control lever up/down/left/right
(
3
/
4
/
1
/
2
) to select:
2)
Press down the control lever to select
SET
:
* A lithium battery is pre-installed in the Remote
Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.
NOTES:
●
In order to maintain optimum performance of the
camcorder, provided cables may be equipped
with one or more core filter. If a cable has only
one core filter, the end that is closest to the filter
should be connected to the camcorder.
●
Make sure to use the provided cables for
connections. Do not use any other cables.
Regarding This Manual
Operation To select
3
6 FOCUS
Move the control lever up.
4 7
Move the control lever down.
2 ¡ LIGHT
Move the control lever right.
1 1
QUICK
REVIEW
Move the control lever left.
Control lever
LCD Monitor
Select
SET
Provided Accessories
AC Adapter
AP-V14A
Audio/Video Cable
(ø3.5 mini-plug to RCA plug)
USB Cable
Core Filter
( for USB cable, pg. 12)
CD-ROM
Remote Control
Unit
RM-V740U
Lithium
Battery
CR2025*
(for remote
control unit)
Shoulder
Strap
( pg. 12)
Lens Cap
( pg. 12)
Battery Pack
BN-VF808U
OR
Power Cord
GR-D770AS_EN.book Page 7 Wednesday, January 17, 2007 10:08 AM
To Next Page
Loading...
Need help?
General
