36 ENEDITING
I ConnectionToA PersonalComputer
[A] Using USB cable [B] Using DV cable
(GR*D93/73 only) OR
TO USB
USB cable
(provided)
TO USB
connector
To DV IN/OUT
- Core filter
DV cable (optional)
--Core filter
TO DV
connector
[A] UsingUSBcable(GR-D93/73only)
It is possible to do the following things:
• Transfer still images stored on a memory card to a PC.
• Transfer stilI/moving images recorded on a tape to a
PC.
• Capture still/moving images in real-time.
• Use this camcorder as a WebOam,
[B] UsingDV cable
It is also possible to transfer stilI/moving images to a PC
with a DV connector by using the provided software,
software equipped with the PC or commercially available
software,
NOTES:
• Refer to "SOFTWARE INSTALLATION AND USB/DV
CONNECTION GUIDE" for the installation of the bundled
software and drivers.
• The software operation manual is provided as PDF file on
the CD-ROM.
• It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (_' pg. 7)
• Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder= (GR-D93/73
only)
• When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depending
on the type of DV connector (4 or 6 pins) on the PC.
• If the PC connected to the camcorder via the USB cable is
not powered, the camcorder does not enter the USB mode.
(GR*D93/73 only)
• The date/time information cannot be captured into the PC.
• Refer to the instruction manuaIs of the PC and Software.
• The stilI images can aIso be transferred to a PC with a DV
connector-equipped capture board. (GR-D93/73 only)
• The system may not work properly depending on the PC or
capture board you are using.
For GR-D93/73 owners:
'USB MODE" and/or"ACCESSING FILES" appears
on the LCD monitor while the PC is accessing data
in the camcorder orthe camcorder is transferring a
file to the PC,
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.
To Next Page
Loading...
Need help?
General
