JVC GR-DVL365EK User Manual

SERVICE MANUAL
DIGITAL VIDEO CAMERA
No. 86667
February 2002
This service manual is printed on 100% recycled paper.
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
GR-DVL365EG/EK,DVL367EG/EK,DVL567EG
SPECIFICATIONS
Regarding service information other than these sections, refer to the GR-DVL167EG service manual (No. 86662).
Also, be sure to note important safety precautions provided in the service manual.
(The specifications shown pertain specifically to the model GR-DVL160,167,365,367,567,765,767,865,867)
Digital Still Camera Function (GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only)
Storage media : SD Memory Card/MultiMediaCard
Compression system : Still image : JPEG (compatible)
Moving image : MPEG4 (compatible)
File size : 3 modes (1280 X 960 pixels*, 1024 x 768 pixels,
640 x 480 pixels)
Picture quality : 2 modes (FINE/STANDARD)
Approximate number of
storable images : 墌 pg. 27.
* GR-DVL867/DVL865/DVL767/DVL765 only.
Connectors
S-Video
Output : Y:1 V (p-p), 75 Ω, analogue
C:0.29 V (p-p), 75 Ω, analogue
AV
Video output : 1 V (p-p), 75 Ω, analogue
Audio output : 300 mV (rms), 1 kΩ, analogue, stereo
DV
Output : 4-pin, IEEE 1394 compliant
Input (GR-DVL867/DVL767/ : 4-pin, IEEE 1394 compliant
DVL567/DVL367/DVL167 only)
USB (GR-DVL867/DVL865/
DVL767/DVL765/DVL567/
DVL367/DVL365 only) : 5-pin
PC (GR-DVL167/DVL160 only) : ø2.5 mm, 3-pole
EDIT (GR-DVL867/DVL865/
DVL767/DVL765/DVL567/
DVL367/DVL365 only) : ø3.5 mm, 2-pole
JLIP (GR-DVL167/DVL160 only) : ø3.5 mm, 4-pole
AC Adapter
Power requirement : AC 110 V to 240 V`, 50 Hz/60 Hz
Output : DC 11 V , 1 A
Specifications shown are for SP mode unless otherwise indicated.
E & O.E. Design and specifications subject to change without notice.
Camcorder
General
Power supply : DC 11.0 V (Using AC Adapter)
DC 7.2 V
(Using battery pack)
Power consumption
LCD monitor off, viewfinder on : Approx. 4.5 W (GR-DVL867/DVL865/DVL767/DVL765)
Approx. 4.3 W (GR-DVL567/DVL367/DVL365/DVL167/DVL160)
LCD monitor on, viewfinder off : Approx. 5.7 W (GR-DVL867/DVL865/DVL767/DVL765)
Approx. 5.3 W (GR-DVL567/DVL367/DVL365/DVL167/DVL160)
Video light : Approx. 2.8 W (GR-DVL867/DVL865/DVL767/DVL765)
Approx. 3.5 W (GR-DVL567/DVL367/DVL365/DVL167/DVL160)
Dimensions (W x H x D) : 79 mm x 89 mm x 184 mm (GR-DVL867/DVL865/DVL767/DVL765)
79 mm x 89 mm x 167 mm
(GR-DVL567/DVL367/DVL365/DVL167/DVL160)
(with the LCD monitor closed and the viewfinder pushed down)
Weight : Approx. 580 g (GR-DVL867/DVL865)
Approx. 570 g (GR-DVL767/DVL765/DVL567)
Approx. 560 g (GR-DVL367/DVL365)
Approx. 550 g (GR-DVL167/DVL160)
Operating temperature : 0°C to 40°C
Operating humidity : 35% to 80%
Storage temperature : –20°C to 50°C
Pickup : 1/3.8" CCD (GR-DVL867/DVL865/DVL767/DVL765)
1/4" CCD (GR-DVL567/DVL367/DVL365/DVL167/DVL160)
Lens : F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens
(GR-DVL867/DVL865/DVL767/DVL765)
F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens
(GR-DVL567/DVL367/DVL365/DVL167/DVL160)
Filter diameter : ø37 mm
LCD monitor : 3.5" diagonally measured, LCD panel/TFT active matrix system
(GR-DVL867/DVL865/DVL567)
2.5" diagonally measured, LCD panel/TFT active matrix system
(GR-DVL767/DVL765/DVL367/DVL365/DVL167/DVL160)
Viewfinder : Electronic viewfinder with 0.24" black/white LCD
Speaker : Monaural
Digital Video Camera
Format : DV format (SD mode)
Signal format : PAL standard
Recording/Playback format : Video: Digital component recording
:
Audio: PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz 2-channel (16-bit)
Cassette : Mini DV cassette
Tape speed : SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time : SP: 80 min.
(using 80 min. cassette) LP: 120 min.

JVC GR-DVL365EK Specifications

General

Brand	JVC
Model	GR-DVL365EK
Category	Camcorder
Language	English

Summary

SPECIFICATIONS

Camcorder Specifications

General and Digital Video Camera specifications for various models, including power, dimensions, and pickup details.

Connectors

AC Adapter Specifications

Details power requirements and output specifications for the AC adapter, including voltage and current ratings.

SECTION 4 CHARTS AND DIAGRAMS

Schematic Diagrams

Detailed schematic diagrams for various functional blocks like Jack, DSC, Main IF, SYSCON, PC IF, etc.

4.1 JACK SCHEMATIC DIAGRAM

4.2 DSC SCHEMATIC DIAGRAM

System Diagrams and Charts

Includes Voltage Charts, Power System, Video System, and Regulator System block diagrams.

4.15 MONITOR SCHEMATIC DIAGRAM

4.16 LCD BL SCHEMATIC DIAGRAM

4.17 CCD SCHEMATIC DIAGRAM

4.19 JACK SCHEMATIC DIAGRAM

4.20 REAR SCHEMATIC DIAGRAM

4.21 B/W VF SCHEMATIC DIAGRAM

4.28 VOLTAGE CHARTS

4.29 POWER SYSTEM BLOCK DIAGRAM

Block diagram illustrating the power distribution system from battery and adapter to various modules.

4.30 VIDEO SYSTEM BLOCK DIAGRAM

Block diagram showing the video signal flow from input to output and internal processing.

4.31 REGULATOR SYSTEM BLOCK DIAGRAM

Block diagram showing the voltage regulator system, DC-DC converters, and power supply lines.

SECTION 1 DISASSEMBLY

1.1 BEFORE ASSEMBLY AND DISASSEMBLY

1.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, ASSEMBLY AND ADJUSTMENT

Lists required tools such as torque drivers, tweezers, and specialized jigs for service procedures.

1.7 EMERGENCY DISPLAY

Explains various emergency display codes (E01-E06) and their possible causes, affecting operation.

Important Safety Precautions

1. Locations requiring special caution

Highlights locations with specific caution labels and inscriptions on the product for safety.

2. Parts identified by the symbol

Identifies safety-critical parts marked with symbols and shaded areas requiring careful handling.

3. Fuse replacement caution notice

Advises caution for fuse replacement to prevent fire hazards, emphasizing type and rating.

11. Products using cathode ray tubes (CRTs)

12. Crimp type wire connector

Safety Check after Servicing

1. Insulation resistance test

Test to confirm specified insulation resistance between plug prongs and exposed parts.

2. Dielectric strength test

Test to confirm specified dielectric strength between plug prongs and accessible parts.

3. Clearance distance

Confirms specified clearance distance between terminals and surrounding parts during component replacement.

4. Leakage current test

Test to confirm specified or lower leakage current between earth ground and exposed parts.

5. Grounding (Class 1 model only)

Confirms specified grounding impedance between AC inlet earth pin and exposed parts.

SECTION 3 ELECTRICAL ADJUSTMENT

3.1 PRECAUTION

Precautions regarding personal computer adjustment and handling of electrical components.

Tools required for adjustments