EasyManua.ls Logo

JVC GR-DVL567 - For Playback Menu

JVC GR-DVL567
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
COPY
STEREO
SOUND
1
SP
OFF
NRETUR
O.O
RE NEON SC LCD / TV
UAOT
IMETDATE /
T I ME CODE
FFO
NRETUR
BEEP
MELODY
NO
TALLY
ID UNMERB
60
DEMO MODE NO
NOSID L EED
NRETUR
CAM ERSET
MSYSTE
AYDISPL
VIDEO SOUND MODE
MOD E
MOD E
12
BIT
SYNC ROH
REC
END
COPY
For Playback Menu
The following procedure applies to all except Synchro
Comp ( pg. 62).
1 Set the VIDEO/MEMORY Switch to VIDEO (GR-
DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/
DVL365 only), then set the Power Switch to PLAY
while pressing down the Lock Button located on the
switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3 Rotate the MENU/BRIGHT wheel to select the
desired function menu, and press it. The selected
function menu appears.
4 Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub Menu.
5 Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6 Rotate the MENU/BRIGHT wheel to select
RETURN and press it twice to close the Menu Screen.
Display
Power Switch
MENU/BRIGHT Wheel
Recording
Start/Stop Button
NOTES:
The date indication can also be turned on/off by
pressing DISPLAY on the remote control (provided).
REC MODE can be set when the Power Switch is set
to PLAY or
M
ANUAL
( pg. 13, 47).
Menu Screen Explanations
pg. 51.
pg. 51.
pg. 62.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(
pg. 13). It is recommended
you use REC MODE in the
VIDEO Menu when using
this camcorder as a recorder
during dubbing (GR-DVL867/
DVL767/DVL567/DVL367/
DVL167 only pg. 53).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
pg. 32).
OFF: Enables snapshots to be
taken during tape playback.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
(GR-DVL867/
DVL865/DVL767/
DVL765/DVL567/
DVL367/DVL365
only)
SYSTEM
DISPLAY
Each setting is linked with
DISPLAY or SYSTEM, which
appears when the Power Switch is
set to
MANUAL
( pg. 48, 49).
The parameters are the same as in
the description on pg. 48, 49.
VIDEO
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)
Lock Button
* Actual menus differ by model and may appear
differently from these illustrations. Some menu items
may be unavailable on your model.
VIDEO/MEMORY Switch
(GR-DVL867/DVL865/DVL767/DVL765/
DVL567/DVL367/DVL365 only; open the
LCD monitor to access this switch.)

Table of Contents

Related product manuals