To Next PageTo Next PageWhy is the snapshot image too dark on my JVC GR-DVL725 Camcorder?
If the image taken using Snapshot on your JVC Camcorder is too dark, it could be because shooting was performed under backlit conditions. Press the BACKLIGHT Button.
Why Digital Zoom does not work on JVC GR-DVL725 Camcorder?
If Digital Zoom does not work on your JVC Camcorder, check if 10X optical zoom is selected. If it is, set “ZOOM” to “40X” or “700X” in the Menu Screen. Also, ensure the VIDEO/MEMORY Switch is set to “VIDEO.”
Why the charger indicator on my JVC GR-DVL725 Camcorder does not light?
If the charger indicator on your JVC Camcorder does not light, it could be because the temperature of the battery is extremely high or low. To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C.
Why Play, Rewind and Fast-Forward functions do not work on JVC GR-DVL725 Camcorder?
If Play, Rewind and Fast-Forward functions do not work on your JVC Camcorder, set the Power Switch to “PLAY.” The Power Switch might be set to “AUTO” or “MANUAL”.
Why are the LCD monitor indications blinking on my JVC GR-DVL725?
If the LCD monitor or viewfinder indications blink on your JVC Camcorder, it means that certain Fade/Wipe effects, certain modes of Program AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time. Re-read the sections covering Fade/Wipe effects, Program AE with special effects and “DIS.”
What to do if there is no picture on JVC GR-DVL725?
If there is no picture on your JVC Camcorder, turn the camcorder’s power off and on again. The camcorder may not be getting power, or some other malfunction may exist.
Why do images on my JVC GR-DVL725 Camcorder LCD monitor appear dark?
If the images on the LCD monitor of your JVC Camcorder appear dark or whitish, adjust the brightness and angle of the LCD monitor. Note that in places subject to low temperature, images become dark due to the characteristics of the LCD monitor, and the displayed colors may differ from those actually recorded. This is not a defect of the camcorder.
Why is my JVC GR-DVL725 not playing back memory card?
If a memory card cannot be played back on your JVC Camcorder, ensure the Power Switch is set to “PLAY.” Also, verify the VIDEO/MEMORY Switch is set to “MEMORY.”
Why JVC GR-DVL725 does not operate when connected via DV connector?
If your JVC Camcorder is connected via the DV connector but does not operate, it might be because the DV cable was plugged/unplugged with the power turned on. Turn the camcorder’s power off and on again, then operate it.
What to do if the cassette will not load properly in JVC Camcorder?
If the cassette will not load properly into your JVC Camcorder, make sure the cassette is in the right position. Also, check if the battery’s charge is low; if it is, install a fully charged battery.
General| Recording Media | MiniDV Tape |
|---|---|
| Optical Zoom | 16x |
| Digital Zoom | 700x |
| LCD Screen Size | 2.5 inches |
| LCD Screen | Color LCD |
| Viewfinder | Color EVF |
| Audio Recording Format | PCM |
| Battery Type | Lithium-ion |
| Video Resolution | 720 x 480 |
| Video Recording Format | DV |
| Input/Output Ports | IEEE 1394 (FireWire) |
| Type | Digital Video Camcorder |
| Effective Pixels | 680, 000 |
