JVC GR-DVL817

80 EN
INDEX Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
SOUND
20
1
:
2
5
P
B
5
IT
LP
50
R
min
E
6
C
w
1
2 4 56
7
3
9 80
1 Displays the selected Fade/Wipe effect.
( pg. 40, 41)
2 Appears when in the Squeeze or Cinema mode.
( pg. 48)
3 Rotates while the tape is running. ( pg. 16)
4 Displays the recording mode (SP or LP).
( pg. 13)
5 Displays the tape remaining time. ( pg. 16)
6 •“REC” appears during recording.
•“PAUSE” appears during Record-Standby mode.
( pg. 16)
7 Appears when the wind cut mode is engaged to
cut down on noise created by wind. ( pg. 48)
8 Appears when the Insert Editing (w) or Insert
Editing Pause (6w) mode is engaged. ( pg. 67)
9 Displays the sound mode for approx.
5 seconds after turning on the camcorder.
( pg. 47)
0 Displays the Time Code. ( pg. 20, 49)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
(GR-DVL817 only)
FINE
10/100
1
2
3
4 5 6
1 Appears when the VIDEO/DSC Switch is set to
“ ” and the Power Switch is set to “ ” or
“ ”.( pg. 17, 26)
2 Appears and blinks during shooting. ( pg. 26)
3 Displays the quality of the stored image.
There are 2 modes available: FINE and STD
(standard) (in order of quality). ( pg. 14)
4 •Appears during shooting.
•Blinks when a memory card is not loaded.
( pg. 26)
5 Displays the number of images that have already
been shot. ( pg. 26)
6 Displays the total number of shots that can
be stored, including those already taken.
( pg. 26)