EN 55
TW
P. AE / EFFECT
STROBE
VIDEO ECHO
CLASSIC FILM
MONOTONE
SEPIA
4
5
1
2
3
OFF
4
B
/
W
A
M
5S
OFF
P
L
A
Y
1
START PLAYBACK
Press the Play button (
4
).
2
ACCESS P.AE/EFFECT SELECT MENU
Point the remote control at the camcorder’s
remote sensor and press EFFECT. The P.AE/
EFFECT Select Menu appears.
3
SELECT P.AE/EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
NOTES:
●
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
●
Repeat from step 2 when you want to change the
selected effect.
●
When a Playback Effect is activated, Pro Snapshot
modes (
Z
pg. 31) are not possible.
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo
. The effects work the same in playback as they
did in recording. Refer to page 45 for more
information.
Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 5 effects.
EFFECT
EFFECT ON/OFF
P.AE/EFFECT Select Menu
(Playback)
PLAY
Lock button
RM-V711U
(provided)
Power Dial
Remote sensor
Play button
To Next Page
Loading...
Need help?
General
