EN 77
% Progressive Dial (PROGRESSIVE)
(
Z pg. 28, 44)
Turn for Progressive Video Recording or Pro
Snapshot Recording.
^ Progressive Button (Z pg. 28, 44)
When this button is pressed, the camcorder starts
Progressive Mode Recording (high resolution).
When pressed during playback, a playback
snapshot is taken.
& OPEN/EJECT switch (Z pg. 12)
Slide the switch down when loading/unloading a
tape.
* Speaker (Z pg. 50)
During playback, the sound can be heard.
( PUSH-OPEN Button (Z pg. 12)
Press to open the LCD monitor.
) Power dial (Z pg. 18)
Turning the camcorder on/off, recording or
playback is possible.
q MENU button (Z pg. 31)
Press this button to make the Menu appear.
ON/OFF button (Z pg. 22)
Press and hold this button for more than approx.
1 second to make the indications appear on the
LCD monitor or the viewfinder.
w Function Navigator Dial (Select Dial)
(
Z pg. 22, 31)
Adjusts the brightness of the LCD monitor or
selects the Menu etc. Referred to in this manual
as “Select Dial”.
e START/STOP button (Z pg. 18)
Starts recording or stops recording to make the
camcorder enter the record-standby mode.
r Viewfinder (Z pg. 15)
Pull out when recording.
1 Zoom switch or volume switch (VOL.)
(
Z pg. 24, 50)
Adjusts zoom during recording or the sound
volume during playback.
2 Grip strap (Z pg. 14)
3 Tally lamp
Lights during recording.
4 Remote sensor (Z pg. 52)
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
5 Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
6 Stereo microphone (Z pg. 68)
For use when recording or audio dubbing.
7 External microphone input connector
(MIC) (Stereo) (
Z pg. 68)
An optional microphone can be connected.
8 JLIP (Joint Level Interface Protocol)
(DIGITAL STILL) output connector
(
Z pg. 58)
Outputs the digital still image to a personal
computer.
9 EDIT jack
Using an editing cable, connect to the remote
control or VCR (Z pg. 63)
0 RESET button (Z pg. 74)
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
! Stop button (5) (Z pg. 50)
Stops playback of the tape.
@ Play/Pause button (6/
4
) (Z pg. 50)
Plays back or stops the tape temporarily.
# Fast-Forward button (
3
) (Z pg. 50)
Fast-Forwards the tape.
$ Rewind button (
2
) (Z pg. 50)
Rewinds the tape.
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
