'_ ' _ _i_,iiiiii/i/i/i/i/i/i/i/iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii
To turn on the camcorder, first set the Power OperationMode
Switch to any operation mode except "OFF",
then pull out the viewfinder fully or open the Turning tile Power Switch dnd Operdtion Switch dlIows
LCD monitor. When setting the Power Switch, you to chor)se tile appropriate operation mode among the
press and hold the Lock Button. following table:
oo o4
V
Lock Button
V
_Power lamp
Operation Switch Power Switch
According to the Operation Switch position
you have selected, "F.AUTO" or "MANUAL"
appears in the upper [eft comer.
When etto0
When,otto[]
(When tile Power
Switch is setto "SS",
"MANUAL" blinks,)
if the Power Switch is set to ,,r_l_A'_ ,, or
"_ ", these indications do not appear.
Power Switch/
Operation Function
Switch Position
5 second
recording
mode:
68
Suitable for standard recording on
a tape.
Allows you to record on a tape in
5-second clips to I<eep the action
mrlving.
Enables shooting in Manual
mode. However, Focus rind
Exposure are the same as in the
Full Auto mode, and it is not
possible to change menu settings
using the MENU/SET Dial.
Suitable fill standard recording in
the MultiMediaCard.
©
"g Digital
_- Still
Camera:
Allows you to play bacl< a
recording on the tape or to
o
_- trdnsfer d still imdge recorded on
the tape or in the MuhiMedia( ard
to a COl_/[)uter.
Allows you to display an image
stored ill the MultiMedia( ard.
OFF Allows you to switch off the
camcorder. After setting• to this
position, Manual Focus and
Exposure ( ontrol are automati-
cally reset to "AUTO".
_= Full Auto: Allows you to record using N(-)
"_ [] special effects or manual
adjustments. Suitable for standard
recording.
Manual: Allows you to set various
[] recr)rding functions using the
"_ Menus. If yOtl want i]lr)re creative
_. capabilities than Full Auto
© recr)rding, try this mode.
To Next Page
Loading...
Need help?
General
