JVC GR-FX14

1
INSTRUCTIONS ENGLISH LYT0860-001B
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
•Available when the Power Switch @ is set to “ ” or “ ”.
•Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
•“DEMO MODE” remains “ON” even if the camcorder power is turned off.
•To cancel Automatic Demonstration, set the Power Switch
@ to “ ” and press the MENU Wheel 1 in
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
1 to select “OFF” and press it.
NOTES:
•When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (
 pg. 3, 4) to ensure safe use of this product.
EG
Printed in Malaysia
1001MKV
*
UN
*
PJ
COMPACT VHS CAMCORDER
GR-SXM58
GR-SXM48
GR-FXM383
GR-FXM38
GR-SX24
GR-FX14
VHS
PAL
625
S-VHS is compatible with
GR-SXM58/SXM48/SX24
only
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD
Downloaded From VideoCamera-Manual.com Manuals

JVC GR-FX14 Specifications

General

Recording Media	VHS-C
Optical Zoom	16x
Focus	Auto/Manual
Image Sensor	1/4" CCD
Viewfinder	Electronic
LCD Screen	2.5" LCD
Microphone	Stereo

Summary

Automatic Demonstration Mode

Safety Precautions and Warnings

General Safety Advisories

Critical safety instructions for preventing hazards like fire, shock, and damage.

Getting Started with Your Camcorder

Battery Pack Usage

AC Power Connection

Date and Time Setup

Camcorder Controls and Indicators

Physical Controls and Connectors

Identification of buttons, ports, and indicators on the camcorder.

On-Screen Display Information

Explanation of symbols and data shown on the LCD monitor and viewfinder.

Recording Procedures

Initiating and Managing Recordings

Steps for setting up, starting, stopping, and adjusting recording brightness.

Playback Operations

Playback Control and Navigation

How to play, stop, fast-forward, rewind, and shuttle search tapes.

Key Camera Features

Connecting to External Devices

TV and VCR Connections

Guide for connecting the camcorder to TVs and VCRs.

Video Tape Dubbing

Menu Navigation and Settings

Accessing Camera and System Menus

How to navigate through the camcorder's menu system.

Manual Focus Adjustment

Using manual focus when auto focus is not optimal.

Exposure Control Settings

Adjusting the image brightness and exposure manually.

Customizing Camera Settings

System Menu Configuration Options

Recording Mode and Digital Zoom

Setting recording quality (SP/LP) and digital zoom levels.

Wide Screen and S-VHS ET

Tape and Recording Parameters

Advanced Shooting Techniques

Night-Scope for Low Light

Fade and Wipe Transition Effects

Creative Shooting Effects

Program AE and Special Modes

Digital Image Effects

Troubleshooting and Problem Solving

Image and Playback Issues

Solutions for visual problems like lines, spots, and blurred playback.

Operational and Warning Indicators

Resolving issues with tape loading, date/time, and understanding warning messages.

Safety and Handling Precautions

Video Light Safety Guidelines

Important safety warnings regarding the hot video light.

Battery and Cassette Management

Environmental and Maintenance Advice

Operating Environment and Protection

Guidance on suitable operating conditions and protecting the unit.

Camcorder Cleaning and Care

Camcorder Technical Specifications

General and Optical Specifications

Details on format, power source, lens, viewfinder, and audio.

Connectors, AC Adapter, and Accessories