JVC GR-FX16

1
INSTRUCTIONS ENGLISH LYT1201-001A
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
• Available when the Power Switch @ is set to “ ” or “ ” while pressing down the Lock Button !
located on the switch.
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
@ to “ ” and press the MENU Wheel 1 in
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
1 to select “OFF” and press it.
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (
 pg. 3, 4) to ensure safe use of this product.
COMPACT VHS CAMCORDER
GR-SXM50
GR-FXM404
GR-FXM40
GR-SX26
GR-FX16
VHS
PAL
625
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD
S-VHS is compatible with
GR-SXM50/SX26 only
EX
Printed in Malaysia
1003-AS-YL-PJ
01 GR-SXM50EX_EN 10/29/03, 11:36 AM1

JVC GR-FX16 Specifications

General

Recording Media	VHS-C
Optical Zoom	16x
Digital Zoom	800x
Focus	Auto/Manual
Viewfinder	Electronic
Image Sensor	1/3 inch CCD
Lens	JVC lens
LCD Screen	2.5 inches

Summary

Automatic Demonstration Guide

Provided Accessories List

Precautions and Safety Information

Safety Precautions

Essential safety warnings and guidelines to prevent hazards like fire and shock.

Operational and Environmental Cautions

Warnings about electrical shock, usage, battery disposal, and environmental factors.

Getting Started: Power and Battery Management

Using the Battery Pack

Instructions for charging and using the camcorder's battery.

Using AC Power

Instructions for powering the camcorder using the AC adapter.

Controls and Indicators Overview

Camcorder Controls and Connectors

Identifies and describes the various buttons, ports, and connectors on the camcorder.

LCD Monitor and Viewfinder Indications

Explains the symbols and information displayed on the LCD monitor and viewfinder.

Recording and Playback Operations

Recording Video

Step-by-step guide on how to record video using the camcorder.

Playback Operations

Instructions for playing back recorded video tapes.

Basic Camcorder Features

Snapshot and 5-Second Recording

Details on using Snapshot and 5-Second Recording features.

Focus and Backlight Adjustment

How to adjust focus and backlight for optimal video quality.

Specialized Camcorder Functions

Video Light and Zooming

Using the video light and the camcorder's zoom functions.

Quick Review and Retake

How to quickly review recordings and re-record segments.

Tape Management and Playback Adjustments

Tracking, TBC, and Counter Memory

Adjusting playback, using TBC, and managing tape segments with counter memory.

Playback Special Effects

Applying creative effects to the playback image.

External Connections and Dubbing

Connecting to TVVCR

How to connect the camcorder to a TV or VCR for viewing and dubbing.

Tape Dubbing Process

Step-by-step instructions for copying tapes from camcorder to VCR.

Menu Settings and Camera Menu

Camera Menu Options (Exposure, Stabilizer)

Settings for exposure adjustment and picture stabilization.

System Menu Overview

Introduction to the system menu and its navigation.

White Balance, Title, and Title Setup

White Balance Settings (M.W.B.)

Adjusting white balance for accurate color reproduction.

Title Superimposition

How to add preset titles and configure title display settings.

System Menu: Recording and Display Settings

Recording Modes and Zoom

Setting recording mode, digital zoom, and light sensitivity (S.LX).

Wide-Screen and S-VHS ET Recording

Enabling wide-screen effect and configuring S-VHS ET recording.

System Menu: Tape and Time Settings

Tape Length and Display Options

Setting tape length, display of on-screen information, and OSD output.

Animation, Time-Lapse, and Tele Macro

Using special recording modes for animation, time-lapse, and close-up shots.

Menu Language and Demo Mode Settings

Menu Language Selection

Selecting the display language for menu messages.

Automatic Demo Mode and LCD Brightness

Activating the demo mode and adjusting LCD monitor brightness.

Advanced Features: Low Light and Transitions

Night-Scope for Low Light

Enhancing visibility in dark environments.

Fade and Wipe Effects

Applying fade-in/out and various wipe transition effects.

Special Effects and Program Modes

Program AE and Special Effects

Using automatic exposure modes for specific shooting scenarios.

Digital Effects

Applying various digital image effects like Sepia, B/W, and Mosaic.

Troubleshooting and Warning Indications

Common Problem Solutions

Solutions for common camcorder issues and malfunctions.

Interpreting Warning Indications

Explains battery level, tape status, and error messages.

Cautions and Care Guidelines

Video Light and Battery Pack Precautions

Warnings for safe use of video light and battery packs.

Cassette Handling and Main Unit Care

Guidelines for proper cassette handling and main unit maintenance.

Usage Environment and Maintenance

Operating Environment and LCD Monitor Care

Advice on where to use the camcorder and how to care for the LCD monitor.

Camcorder Cleaning and Condensation

Instructions for cleaning the camcorder and understanding condensation issues.

Technical Specifications