22
LCD BRIGHT
(Applicable models only)
To adjust the brightness of the LCD monitor,
perform the following steps quickly (within approx.
1 second by each interval):
1) Select “LCD BRIGHT” in SYSTEM MENU. The
“BRIGHT ON” message appears.
2) Press the BRIGHT Wheel
1 in to return to
normal screen.
3) Rotate the BRIGHT Wheel
1 to display the
bright level indicator
k.
4) Rotate the BRIGHT Wheel
1 until the
appropriate brightness is reached. After the
BRIGHT Wheel
1 is released, the indicator
soon disappears and adjustment is completed.
MENU LANG.
Allows you to select the language (ENGLISH or
RUSSIAN) used in all messages displayed on
screen.
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
@ is set to “ ”
or “
” and “DEMO MODE” is set to “ON” (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor* or
viewfinder.
* Applicable models only.
DATE/TIME
Allows you to set the current date and time.
(
pg. 7)
01 GR-SXM50EX_EN 10/29/03, 11:36 AM22
To Next Page
Loading...
Need help?
General
