22
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
@ is set to “ ”
or “
” and “DEMO MODE” is set to “ON” (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
•When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor* or
viewfinder.
* Applicable models only.
MENU LANG.
Allows you to select the language (ENGLISH or
RUSSIAN) of messages only in menu screens
(CAMERA MENU, SYSTEM MENU or their sub-
menus).
TITLE LANG.
Allows you to select the language (ENGLISH,
FRENCH, RUSSIAN or UKRAINIAN) of TITLE in
CAMERA MENU. After selection, the TITLE setting
menu (
p. 19) appears automatically.
DATE/TIME
Allows you to set the current date and time.
(
pg. 7)
Downloaded From VideoCamera-Manual.com Manuals
To Next Page
Loading...
Need help?
General
