EN21
Digital Effects
1
Set the Power Switch to “ ”.
2
Press DIGIFECT repeatedly until the desired mode’s
name and indication appear.
They are displayed for approx. 2 seconds, then the
name disappears so that only the indication remains.
The mode is activated.
3
To cancel the effect, press DIGIFECT repeatedly until
“OFF” appears. “OFF” is displayed for approx.
2 seconds.
DIGIFECT Button
Power Switch
SEPIA
Recorded scenes have a brownish tint like old photos.
Combine this with the WIDE mode ( pg. 22, 23) for a
classic look.
MONOTONE
Like black and white films, your footage is shot in B/W.
Combine this with the WIDE mode ( pg. 22, 23) for a
classic look.
NEGA POSI
The colours of a picture are reversed.
MOSAIC
Turns recorded scenes into a mosaic pattern.
STRETCH
Doubles the width of the picture horizontally.
CLASSIC FILM
Makes your footage look like a classic movie by
shooting in black and white, with a strobing effect, and
black bars added at the top and bottom.
STROBE
Your recording looks like a series of consecutive
snapshots.
VIDEO ECHO
Adds a “ghost” to the subject, giving your recording a
“fantasy” feeling. Zoom magnification of over 10X is not
available.
NOTES:
●
Digital Effects can be changed during
recording or during Record-Standby.
●
Digital zoom (
pg. 16) cannot be used
when the “VIDEO ECHO” mode is activated.
●
This function cannot be activated during the
“Night-Scope” (
pg. 18), “CLASSIC FILM”,
“STROBE” and “VIDEO ECHO” mode.
To Next Page
Loading...
