JVC GR-SXM260 - User Manual

1
INSTRUCTIONS ENGLISH LYT1214-001C
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
• Available when the Power Switch @ is set to “ ” or “ ” while pressing down the Lock Button !
located on the switch.
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
@ to “ ” and press the MENU Wheel 1 in
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
1 to select “OFF” and press it.
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (
 pg. 3, 4) to ensure safe use of this product.
COMPACT VHS CAMCORDER
GR-SXM260
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD
US/UC
Printed in Malaysia
1203YDR-NF-VM
For Customer Use:
Enter below the Model No. and Serial No. which is
located on the bottom of the camcorder. Retain this
information for future reference.
Model No.
Serial No.
GR-SXM260_01-05_EN 1/12/03, 9:55 AM1

JVC GR-SXM260 Specifications

General

Brand	JVC
Model	GR-SXM260
Category	Camcorder
Language	English

Summary

PRECAUTIONS AND SAFETY

SAFETY PRECAUTIONS

Safety measures to reduce risk of electric shock, fire, and exposure to moisture.

IMPORTANT SAFETY INSTRUCTIONS

GETTING STARTED

BATTERY AND POWER MANAGEMENT

Using the battery pack, AC power, charging, and refresh procedures.

BATTERY STORAGE AND DATE;TIME SETTINGS

Date;Time Settings

Steps to set the camcorder's date and time using the menu system.

CAMCORDER HANDLING AND ADJUSTMENTS

VIEWFINDER AND CASSETTE MANAGEMENT

Adjusting the viewfinder and loading/unloading cassettes.

CONTROLS, CONNECTORS AND INDICATORS

LCD Monitor;Viewfinder Indications

Explanation of icons and indicators displayed on the LCD monitor and viewfinder.

RECORDING AND PLAYBACK PROCEDURES

RECORDING

Step-by-step guide to recording video footage.

PLAYBACK

Steps to play back recorded video tapes.

MENU SETTINGS AND CONFIGURATION

EXPOSURE AND STABILIZER SETTINGS

Adjusting exposure and activating the picture stabilizer.

WHITE BALANCE AND TITLE CONFIGURATION

WHITE BALANCE AND TITLE SETUPS

SYSTEM MENU OPTIONS

RECORDING MODES, ZOOM, AND FORMATS

ADVANCED FEATURES AND EFFECTS

FADE;WIPE EFFECTS AND PROGRAM AE

TROUBLESHOOTING AND WARNING INDICATIONS

TROUBLESHOOTING GUIDANCE

Common problems and solutions for camcorder issues.

Warning Indications

Explains various warning indicators and error messages displayed by the camcorder.

CAUTIONS AND MAINTENANCE

AC ADAPTER AND BATTERY PRECAUTIONS

Safety and usage guidelines for the AC adapter and battery packs.

LCD MONITOR CARE AND CAMCORDER MAINTENANCE

CAMCORDER CLEANING AND AFTER-USE STEPS

SPECIFICATIONS

GENERAL AND CONNECTOR SPECIFICATIONS

CAMCORDER AND ACCESSORY SPECIFICATIONS