22 EN
Fade/Wipe
Off
(No indication)
OFF
B
K
Black Fader
Mosaic Fader
Shutter Wipe
Slide Wipe
Corner Wipe
Auto Select
B
K
Fade/Wipe
Mosaic Fader
P Dissolve
FADE IN
[Ex. : Black Fader]
FADE OUT
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT FUNCTION
2
Press SELECT repeatedly until “
Fade/Wipe
”
appears.
ENGAGE FADE- OR WIPE-
STANDBY MODE
3
Press SET to cycle through the modes as shown at
left. Once the desired mode appears, it is selected
and reserved.
•The selected mode’s name and its indication are
displayed in the viewfinder for approx. 2 seconds.
Then the name disappears, and only the indication
remains.
START RECORDING
4
Press Recording Start/Stop to start recording and
activate fade- or wipe-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade- or wipe-out.
TO CANCEL FADE- OR WIPE-
STANDBY MODE
5
While “
Fade/Wipe
” is displayed, press SET twice.
•“OFF”
is displayed for approx. 2 seconds and the
reserved fade or wipe is cancelled.
NOTE:
Pressing and holding the Recording Start/Stop button
allows you to record a black blank screen, a mosaic
pattern if Mosaic Fader is selected or the stored scene if
Dissolve or Auto Select is selected.
RECORDING
Advanced Features (cont.)
Function indication
After
2 sec.
SELECT button
PROGRAM AE select dial
SET button
To Next Page
Loading...
