To Next PageTo Next Page
Need help?Do you have a question about the JVC HR-J270 and is the answer not in the manual?
General| Type | VCR |
|---|---|
| Video Format | VHS |
| Remote Control | Yes |
| Tuner | Yes |
| Recording Speed | SP, LP |
| Connections | RF, Composite Video |
| Video Recording System | 2 rotary heads, helical scanning system |
| Inputs | Composite video, RF |
| Outputs | Composite video, RF |
Step-by-step guide for connecting the VCR to TV and power.
Automatic configuration of channels, clock, and program numbers.
Downloads channel and program data via T-V Link from compatible TVs.
Selects the language for on-screen messages and menus.
Configures the VCR to control a satellite receiver for timer programming.
Explains features like NexTView Link, TV Auto Power On, and VCR Auto Standby.
Instructions for loading tapes, starting, and stopping playback.
Details on slow motion, high-speed search, and frame-by-frame playback.
Adjusts the tape tracking manually for optimal picture quality.
Quickly access the last timer-recorded program.
Quickly access specific points on a recorded tape using index codes.
Allows the tape to play back automatically up to 100 times.
Steps for loading tapes, selecting channels, and starting recording.
Details on ITR, recording one program while watching another.
Easy method to record for 30 minutes to 6 hours automatically.
Shows elapsed time or remaining time on the tape during recording/playback.
Optimizes picture quality during playback and recording using signal tracking.
Simplified timer programming using SHOWVIEW codes.
Timer programming without SHOWVIEW codes, setting start/stop times.
Automatically records satellite programs based on receiver signals.
Connects a camcorder to record video onto the VCR.
Duplicates tapes between two VCRs or uses VCR as source/recorder.
Guides connection of a satellite receiver for viewing and recording.
Connects an external decoder to access scrambled channels.
Connects the VCR to a Hi-Fi stereo for audio playback.
Customizes VCR functions like B.E.S.T., O.S.D., and Auto Timer.
Automatically switches to LP mode if SP mode is insufficient for recording.
Reduces power consumption when the recorder is turned off.
Selects input mode for AV2 connector (Decoder, SAT, or standard L-2).
Sets the color system for recording or playback (PAL, NTSC, MESECAM).
Automatically scans and assigns receivable TV stations to channels.
Removes unwanted channels from the tuner memory.
Rearranges the order of stored channels.
Sets station names for registered channels.
Sets new station names for channels not yet registered.
Configures the VCR's video output channel or turns it off for AV connection.
Manually sets Guide Program numbers for SHOWVIEW timer recording.
Manages automatic clock adjustments via PDC signals for accurate timekeeping.
Solutions for power-related issues like no power or remote control failure.
Addresses common playback problems like picture issues or noise.
Solutions for recording failures, tape transport issues, and timer recording problems.
Addresses issues with timer programming and recording execution.
Resolves issues like whistling, skipped channels, and lost settings.
Answers common questions regarding playback behavior and features.
Answers frequently asked questions about recording and timer functions.
