initial settings20
PR SET
Change Station Preset Position
get to the main menu Press MENU. Select the icon PR SET using
the * and Tbuttons and press OK. The Manual Channel Set
screen of the channel position currently received appears.
get to the confirmation screen Press MENU.
select item Press the ^ and & buttons on the Remote Control
to select the item you want to move then press T.
select new position Press the ^ and & buttons to move the
station to the new preset position, then press OK.
close confirmation screen Press MENU.
Example: If you moved the
station in position 4 to
position 2, the stations
originally in positions 2
and 3 each move down
one space.
HR-J295EK-EN/p17-22 2/27/2, 2:58 PM20
To Next Page
Loading...
