JVC HR-S5200U - Timer-Recording without VCR Plus+; Manual Timer Programming Steps; Setting Recording Schedule; Timer Mode Management

Timer-Recording
without VCR Plus+
POR INSTRUCCIONES EN
ESPANOL VEA p. 42 — 43.
With
the
On-Screen
Timer
Programming
function
introduced
here
you
can
directly
program
the
VER's
timer
to
record
up
to
8
TV
shows,
up
to
a
year
ahead.
It's
especially
convenient
when
you
want
to
timer-record
programs
while
you're
away
from
home
for
long
periods
of
time
(over
a
week),
or
for
TV
programs
listed
without
a
PlusCode.
TIMER
PROGRAMMING
IS
NOT
POSSIBLE.
UNLESS THE CLOCK HAS BEEN SET.
POWER ON;
‘SELECT CHANNEL
3 OR 4 (OR AV MODE)
TVNIDEO
DAILY
WEEKLY
You can also use the MENU, SET
and SELECT buttons on the VCR.
EN-30
@ The VCR power will come on automatically. If watching
**-* on channel 3 or 4 bé sure that the VIDEO indicator is lit. If
the indicator is not lit; press TV/VIDEO so ‘that it lights.
m If the clock has not been set, set the clock before starting
step 2; p. 11
. Press SET to move to a vacant
program number, and then
press SELECT.
Initially all programs are
vacant, and the cursor is at
3 a 1. So simply press PRESS ELT ge)
EINPUTTHE DATE
4 Press SET to set the month,
and then press SELECT.
5 Press SET to set the day.
The day of the week will
automatically appear.
™ To record the program daily
(Mon-Fri) press DAILY
(Digit key 8). To record the
program weekly press WEEKLY (Digit key 9). "DAILY"
or" WEEKLY" will appear on the screen.
6 Press SELECT.
PRESS: CT, SET 4/-
PRESS (MENU) toed
(Continued on next page.)
"ERROR" WARNING
If the start time you input has already passed (i.e. is prior to the
present date and time), the VCR will flash "ERROR" on the
Program Set screen.
STOP i
“CHANNEL SP
PROGRAM 1
= ERROR,
DATE. | “sr22 weo
START 12:30 AM
PRESS. erie SET 4/-)
PRESS (MENU) TO END
Check if you've input the correct time and date. Remember: late
night shows beginning at midnight or later must have the next
day's date.
Piess SET to set the hour
(making sure that AM or‘ ? PROGRAM 1
PM is correct), and then DATE. 12/28 TH
press SELECT. 4
Press SET to set the
minutes, and then press .
SELECL FES GEASS?
ct Rat dd,
9 Set the stop'time in the same
way as you set the start time
in steps 7-8.
PROGRAM t
DATE. 12/28 THU
START 12:00 PM
Sto OEM
PRESS (SELECT, SET +/-)
PRESS (MENU) 10 END
1 0 _ Press the Digit keys to enter
the channel number, and PROGRAM 1
then press SELECT. DATE 12/28 THU
: 12:00 PM
STOP 4:00 PM
CHANNEL 25SP
PRESS (SELECT, SET 4/-
PRESS {MENG TOEND :
1 Press SET to choose SP or
EP, and then press SELECT.
@ To inptit ‘another program,
repeat steps 3 - 11. (You
can set up to a maximum
of 8 programs.)
PROGRAM 1
tH
- DATE. = 42/28 THU
START 92:00 PM
STOP 1:00 PM
CHANNEL 25EP
PRESS (SELECT, SET 4/-)
PRESS (MENU) TO END )
™ Select the desired Auto Timer setting. See page 32 for
details.
1 3 Press MENU again.
B 1 Pees MENU:
TO DISENGAGE THE TIMER
For safety, when AUTO TIMER is "OFF", your VCR disables all
other functions while in the timer mode.
@ To use your VCR, first disengage the timer mode by pressing
TIMER again. Now all functions will be operable.
To re-engage the timer, press TIMER.
A
q Press TIMER.
The VCR will enter the timer mode and power will go
Off. :
For AUTO TIMER and other timer programming features, CF p. 32.
For other error indications, (7 p. 39.
NOTES:
a If there'is a power failure, the VCR will remember your timer-record
seléctions for 60 minutes. : :
™ When timer-recording cable channels received through a Converter
Box, be sure to keep the Converter Box set to ON.
EN-31 —