C
Colleen LopezJul 30, 2025
Why is my JVC HR-S9700EU remote control not working?
- UuhintonJul 30, 2025
If the remote control for your JVC VCR isn't working, the batteries may be dead. Replace them with new ones.
To Next PageTo Next PageWhy is my JVC HR-S9700EU remote control not working?
If the remote control for your JVC VCR isn't working, the batteries may be dead. Replace them with new ones.
What to do if the playback picture on my JVC VCR is blurred?
If the playback picture on your JVC VCR is blurred or interrupted, or if you see a 'USE CLEANING CASSETTE' message, the video heads might be dirty. Use a dry cleaning cassette TCL-2UX or consult your JVC dealer.
Why does my JVC VCR have no playback picture?
If you're not seeing a picture while a tape is playing on your JVC VCR, check your connections and TV settings: * **RF connection:** Make sure your TV is set to the correct video channel, and that the VCR's video channel is properly set. Perform “Video Channel Set” (pg. 78). * **AV or S-VIDEO connection:** Ensure your TV is set to AV mode.
General safety warnings and precautions for operating the recorder.
Precautions for placement, ventilation, and avoiding damage.
Details the purpose and operation of each button on the remote.
Guides through connecting the recorder to a TV using RF or SCART cables.
Details the procedure for connecting via S-Video and audio cables.
Step-by-step guide to automatically configure channels, clock, and programs.
Explains how to download channel and program data via T-V Link.
Steps to configure the recorder to control a satellite receiver.
Step-by-step instructions for loading a cassette and starting playback.
Step-by-step guide to start and stop recording a program.
Guide to programming recordings using SHOWVIEW codes.
Programming timer recordings without SHOWVIEW codes.
Recording satellite programs automatically via receiver signals.
Dubbing video from a camcorder to the recorder.
Transferring video between two recorders.
Replacing the original audio track with new sound.
Replacing parts of a recorded scene with new material.
Creating edited videos by pre-programming scenes.
Guides for connecting a satellite receiver to the recorder and TV.
Steps to connect and set up an external decoder.
Automatic assignment of receivable stations.
Storing channels not found by automatic setup.
Manually assigning program numbers for SHOWVIEW timer recording.
Setting the recorder's internal clock manually.
Troubleshooting problems related to the recorder's power.
Resolving issues with tape loading, rewinding, and fast-forwarding.
Diagnosing and fixing problems during tape playback.
Resolving issues with starting recording or TV broadcasts.
Resolving issues with timer programming and recording.
Fixing issues like whistling, skipped channels, and remote control malfunctions.
General
