Do not connect the all other connections have been made.
If you need more detailed information, see page 5.
Illustrations of the input/output terminals below are
typical examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on
the rear vary among the components.
To assemble the AM loop antenna
FM antenna (supplied)
Extend it so that you can obtain
the best reception.
AM loop antenna (supplied)
Turn it until the best reception
is obtained.
To a wall outlet
Plug the AC power cord only after all
connections are complete.
• Demonstration will start automatically. To
cancel it, see page 8.
4
To Next Page
Loading...
