EisteninOt_ the::R_di_
To select the band (FIVI/AlVl)
: if!
FB_/AM
FM _ AM q
To tune in to a station
While FM or AM is selected...
PREV. NEXT
Increases the frequency.
,, ' Decreases the frequency.
When a station (frequency) with sufficient signal strength is
tuned ill, the frequency search stops.
• When you repeatedly press tile button, the frequency
changes step by step.
• You call also use _41/IB,.t_ buttons on the main unit.
To stop searching manually, press either button.
If the received FM station is hard to listen )
(holding then...)
The MONO indicator
lights on the display.
Reception will improve
though stereo effect is
lost--monaural
reception mode.
To restore the stereo
effect, press the button
again (the MONO
indicator goes off).
To preset Stations
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset, then enter into
the presetting mode.
SET
/DISPLAY .-r
2 Select a preset numher for the station you store.
3 Store the station.
SET
/DISPLAY -_
".titlJ6',
,S; g o,-- -,
I' I__1
To turn in to a Preset Station
Select the hand (FM or AM).
FMiAN
FM "_* AM q
2 Select a preset numher for the station you store.
Examples:
To select preset number 5, press 5.
To select preset number 15, press
+10, then 5.
To select preset number 30, press
+10, +10, then 10.
• You can also use the PRESET
+_ control on the main unit.
11
To Next Page
Loading...
