JVC HX-GD8 - Tape Playback Operations; Inserting and Playing Cassette Tapes; Tape Direction and Reverse Mode Settings; Music Scan for Locating Recordings

Naying Ba_kaTa_e Toreversethetapeautomatically
To insert a tape
You can play back type I tapes.
• The use of C-120 or longer tape is not recommended.
Push
RE,MODE
(holding then...)
• You call also use REVERSE MODE button on the unit.
/ t_! _/I
\ i_,_,,F_:_[-.......... _ _'/i Insert
Close
TAPE
Before or after play...
\
Rewinds the tape to the right.
/ I ('-;_"Q_, Rewinds the tape to the left.
• You call also use I-'4_l/l_,q_[ buttons on the remote control.
To changethetape runningdirection
TAPE
m,-(forward)l
-- 4 (reverse)< ---J
(Z,) Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed When the current
side of the tape reaches its end, playback stops.
To locatethe beginningor nextof a recording--
MusicScan
During play, designate where tile recording you want is
located--specify how many recordings need to be skipped
on the tape.
Fd C] ¸ .... );i :)F=i
__ Searches _r the beginning of the
_¢ recording to the right.
, \ , Searches for the beginning of the
recording to tile left.
• You call also use I-,4_l/ll,q_[ buttons on tile remote control.
14