PICTURESOURCE
You can obtain optimal picture quality by selecting an
appropriate option--picture source type (either video source
or film source).
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video
and fihn sources, the System automatically
changes the processing to match it to file picture
type (film or video source) of the current chapter.
FILM: To play a fihn source disc.
VIDEO: To play a video source disc.
SCREENSAVER
You can activate or deactivate screen saver while operating
the built-in disc player.
Select one of the following:
ON: The pictures on the TV becomes dark when no
operation is done for about 5 minutes.
OFF: To cancel the screen saver.
FILETYPE
If both audio tracks (MP3 or WMA files) and still picture
(JPEG files) are recorded on a disc, you call select which to
play.
Select one of the following:
AUDIO: To play MP3/WMA files.
STILL PICTURE: To play JPEG files.
• AUDIOSetup Menu
You can adjust tile sound settings of the System.
DIGITALAUDIOOUTPUT
When using the digital output terminal on the rear, set this
correctly according to file connected component.
Select one of the following:
PCM ONLY: To connect to a linear PCM digital
equipment such as all MD recorder.
DOLBYDIGITAL To connect to a Dolby Digital decoder
/PCM: or an amplifier with a built-in Dolby
Digital decoder.
STREAM/PCM: To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
• See also "OPTICAL DIGITAL OUTPUT Signals" on
page 47.
DOWNMIX
When playing a multi-channel DVD, the System converts
flae signals into 2 channels.
Downnfix setting is effective for the speaker output (and
digital audio output if "DIGITAL AUDIO OUTPUT" is set
to "PCM ONLY") from this System.
Select one of the following:
DOLBY To connect an amplifier with tile Dolby
SURROUND: Pro Logic decoder.
STERE(): To connect a conventional stereo
amplifier, receiver, MD player, TV, etc.
36
To Next Page
Loading...
