28
ENGLISH
CD CHANGER OPERATIONS
Playing discs
Select the CD changer (CD-CH).
* If you have changed “EXT IN” setting to “LINE IN”
or “SIRIUS” (see page 26), you cannot select the CD
changer.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
Note:
Folder name appears on the display instead of
“ROOT,” if an MP3 disc contains a folder.
We recommend that you use the JVC MP3-
compatible CD changer with your unit.
By using this CD changer, you can play back your
original CD-Rs (Recordable) and CD-RWs
(Rewritable) recorded either in audio CD format
or in MP3 format.
• You can also connect other CH-X series CD
changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3
discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD changers
with this unit.
Before operating your CD changer:
• Refer also to the Instructions supplied for
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display.
If this happens, remove the magazine and
set the discs correctly.
•
If no magazine is loaded in the CD changer, “NO
MAG” appears on the display. If this happens,
insert the magazine in the CD changer.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection and make sure the cords are
connected firmly. Then, press the reset
button of the CD changer.
MP3 indicator
Selected disc number
(folder) indicator
Selected folder
number
EN28-31_KD-AR400_G400[J]f.p65 9/26/03, 4:20 PM28
To Next Page
Loading...
Need help?
General
