ENGLISH
SETTINGS
23
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1 Enter the PSM settings.
2 Select a PSM item.
General settings — PSM
Continued on the next page
Indication Item Setting, [reference page]
DEMO
Display demonstration
• DEMO ON [Initial]
• DEMO OFF
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
CLOCK H
Hour adjustment
0 – 23 (1 – 12)
[Initial: 0 (0:00)]
: See also page 5 for setting.
CLOCK M
Minute adjustment
00 – 59
[Initial: 00 (0:00)]
: See also page 5 for setting.
24H/12H
Time display mode
• 12H
• 24H [Initial]
: See also page 5 for setting.
CLK ADJ
Clock adjustment
• AUTO [Initial]
• OFF
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
AF-REG*
1
Alternative frequency/
regionalization reception
• AF [Initial]
• AF REG
• OFF
: When the currently received signals become weak, the unit
switches to another station or service (the programme may
differ from the one currently received), [11, 19].
: When the currently received signals become weak, the unit
switches to another station broadcasting the same programme.
: Cancels (not selectable when “DAB AF” is set to “AF ON”).
PTY-STBY
PTY standby
OFF [Initial], PTY
codes (see page 10)
: Activates PTY Standby Reception with one of the PTY codes,
[11, 19].
TA VOL
Traffic announcement
volume
VOL 15 [Initial] : VOL 00 – VOL 30 or 50*
2
, [11].
EN22-27_KD-DV4202[E]3.indd 23EN22-27_KD-DV4202[E]3.indd 23 12/8/05 4:59:57 PM12/8/05 4:59:57 PM
To Next Page
Loading...
