7INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 40 and 41.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4
Finish the procedure.
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 48.
Audio level meter display
(see “LevelMeter” on page 40)
EN02-09_KD-DV7406_005A_f.indd 7EN02-09_KD-DV7406_005A_f.indd 7 2/12/08 2:01:12 PM2/12/08 2:01:12 PM
To Next Page
Loading...
