EasyManua.ls Logo

JVC KD-DV7407

JVC KD-DV7407
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
60
Symptom Remedy/Cause
DivX/MPEG Video/MP3/WMA/WAV
Disc cannot be played back. Change the disc.
Record the tracks using a compliant application in
the appropriate discs (see page 6).
Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or
<.wav> to the file names.
Noise is generated. Skip to another track or change the disc.
Tracks cannot play back as you have intended
them to play.
Playback order is determined when files are recorded.
Longer readout time is required (“Reading”
keeps flashing on the display).
Readout time varies due to the complexity of the
folder/file configuration. Do not use too many
hierarchies and folders.
No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
Record the audio track using MP3 or Dolby Digital as
the audio stream of DivX files.
Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
Elapsed playing time is not correct. This sometimes occurs during playback. This is caused
by how the tracks are recorded.
“Please Eject” appears on the display. Insert a disc that contains tracks of appropriate formats.
Correct characters are not displayed (e.g.
album name).
This unit can display Roman alphabets, Cyrillic
alphabets, numbers and symbols (see page 55).
USB device
Noise is generated. The track played back is not a playable file format
(MP3/WMA/WAV). Skip to another file.
Do not add the extension code <.mp3>, <.wma>,
or <.wav> to non-MP3/WMA/WAV tracks.
Tracks cannot play back as you have intended
them to play.
Playback order may differs from the one played back
using other players.
“Reading” keeps flashing on the display. Readout time varies depending on the USB device.
Do not use too many hierarchy, folders and empty
folders.*
Turn off the power then on again.
Do not pull out or connect the USB device repeatedly
while “Reading” is displayed on the display.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
EN58-65_KD-DV7408_001A_f.indd 60EN58-65_KD-DV7408_001A_f.indd 60 2/20/08 9:14:59 AM2/20/08 9:14:59 AM

Table of Contents

Related product manuals